Search results

Be nice to have a on click script like in Linux for windows 10 to run dual cpus with zenstates all in windows startup anyone made one? rather than change processor affinity on Asus srv each time.

Change from /4 to /2 on p0 state and redo multipler to 32 probably 1.181 volts. Called fid did and voltage for amd

OPPS I see you tried some of what I said more volts required but vrm cooling a must

Yep might be I had same setting had to back off to 3.2g with that voltage. I checked c6 core and performance boost didn't seem to matter. 3.4g at 1.181v I can't pass cinibench r20 blackscreens.i have a fan on my vrm heatsink and Nero made a water block for his but vrm temps and power the weak...

Windows 10 Nero probably have better info he has single cpu setup both of ours our supermicro boards think vrms are 4 70amps each cpu. I would stay there for a bit at 3.5ghz that's over 5000 cinebench r15 enjoy your 2990wx!

Vrms the issue thought it might be 80c or around 268watts start to throttle without OC disabled. Cpu no problem temp

l don't know where the edit button, please help me mods. Looks pretty good Nero had his from 3.4 to 3.8 g I need higher than 1.2v for 3.4g plus but 2 CPUs hard to run try cinibench r20 Mine on air have to get them back under water about 61 degrees loaded 3.2 to 3.4 GHz but vrms going up to 71...

Very nice build!

Air cooling world record in a miniITX case

Like the look of this CPU-Z Benchmark for AMD EPYC 7501 (16T) - CPU-Z VALIDATOR

Hmm not the one I linked you Nero?

much harder to run cinebench r20 got 19762 at 3.2g dual cpu 3.4 crashed stock 16000 on 2 epyc 7501

last one

fyi

happy with that at 3.4g on both cpus 1.181 volts each thanks again nero!

Well thanks guys I hit 3ghz all core on 2 7501 at 1.181v 8006 cinebench vrms go from 60c to 71c 160watts per cpu my tdp seems lock at 170watts so maybe 3.2g tops without custom vrm block about 220amps vrms currently.throttle around 268amps or 80c.disable above 4g decoding for Windows and disable...

That looks great now 3.8 -4ghz all core will hold enjoy your 2 1950x I will need a different vrm block but I put some small fans on mine for now.

Vrm cooling be key for sure looking forward to pics when done