Search results

  1. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    Found a way to go to recovery mode if cimc has locked you out, and you cant get in with default credentials. hook a console cable to the cimc port on the front, and load your terminal program, when it prompts, press *** press enter, type in boot current recovery . press enter it will need a...
  2. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    i have bios and cimc updates. just cant get into cimc to apply them
  3. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    You can go to the bios by pressing F6 while connected to the console port. The password is not set, set a password and the bios will let you right in.
  4. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    the drive in mine is an micron 5100 max 250GB SED m2 sata . There is a recovery built into the cent os boot, but its also password protected. I know you can wipe and load esxi but would rather use NFVIS
  5. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    @devz3ro , yea that is the same predicament that I have
  6. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    the ones i bought have static ip set and the username / password is not cleared. The bios password is, but the F8 menu for CIMC is disabled.
  7. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    How do you update the bios on these? Seems my bios has a password on it.
  8. S

    $127 Cisco ENCS5412/K9 Xeon-D 1557 (12 core), 32G ram

    Im gonna buy more , lol
  9. S

    Brocade ICX Series (cheap & powerful 10gbE/40gbE switching)

    I have probably missed it. But for the icx 7450, I know you stack them using the rear 40g or the front 10g. And some commands. But can you then run another 40g cable off the 2nd switch to the main 100g switch we have?
  10. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    Has anyone found an io shield for these?
  11. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    Oculink is (SFF-8611), not sff-8654. While it is 8 lanes, it is a completely different connector, and it will be confusing to people if they think it's the same. The (SFF-8654) is a slimline SAS connector with 74 pins. An occulink (sff-8611) is 42 pins.
  12. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    Here is the memory supported list
  13. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    Should be able to use the SFF-8654-8i natively for SATA. See here: The 50cm SlimSAS 8i cable is compatible with any motherboard that uses the SFF-8644 connector and supports both SAS and SATA devices at speeds of up to 6 Gb/s. https://www.microsatacables.com/8i-to-8x-sata-version-50cm
  14. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    The chip is a asmedia, asm2824 B3ng8227a1 2043 ASMedia PCIe product ASM2824, a low latency, low cost and low power 24 lane , maximum 12 downstream ports packet switch. With upstream PCIe Gen3x8 bandwidth, ASM2824 can enable users to build up various high speed IO systems, including server...
  15. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    I'll pull ours apart and take photos for everyone
  16. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    Actually, the g431 has 2 boards. One for power distribution and fans, and one for pcie distribution.
  17. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    The full server from gigabyte has an expansion board with 10x 16x pcie 8 ports , but gigabyte uses one cable.
  18. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    Yea I'm pretty sure it will work . That's the same link I posted earlier :)
  19. S

    Gigabyte MJ11-EC1 EPYC 3151 Mystery

    The port uses this SlimSAS X8 (SFF-8654) 74P. Which can connect to this SlimSAS 8i (SFF-8654) to PCIe x8 Slot Adapter