Search results

The images are around, just verify the checksum with the one at Juniper. The images are around, just verify the checksum with Junipers before installing the image. searching for the filename on google will get you some hits to download.

I will NOT SHARE firmware.. a few ruined it for everybody.

search the filename on google and a lot of times you can find it.

.

.

all my switch interconnects are 40G, FreeNAS server to Switch 40G, servers are 10G and backbone is on 10G

.

.

the SRX650 is EoL and you won't be able to add coverage as I almost guarantee these were registered. after you get it. Furthermore, 12.3X48 is the latest that will run on it. EDIT: fix punctuation and add more info

yes you can use the 40G as normal port. Advanced routing license is dicey if your NOT the original registered owner of the EX4300.

Open a case with JTAC and ask.

you CANT do OpenVPN on SRX.

Read the link a page back on how to get in U-boot and how to prepare the USB stick and how to install it.

.

google the filename and alot of time you can find it.

post the full console output from the time you turn on the SRX

what baud rate you have your terminal set to? should be 9600,n,8,1

Switch? this thread is about the SRX firewall. send me a PM. i should have the firmware you want.

Boot from USB and Recovering from a Failed Software Upgrade - Juniper Networks if that doesnt work send me a PM, i can help

15.1 runs fine on the ex2200 with a simple config but the CLI is SLOW. the problem with 15.1 is this on the ex2200, very little memory left after JunOS boots, so if you want to config something that needs ram, your pretty much screwed and can lead to a crash. <Cough> look above your post who...