Does anybody know which version of the SN2100 that are safe from the AVR54 bug? Any specific date or revision?
The Nvidia KB article does not have much info: Intel Atom Boot Issue | Knowledge Base
I have MCP-290-00053-0N on my old 846 cases, seller found the correct rails based on chassis serial number. They were end of life back in 2014 when I bought mine, so might be kind of hard to find now.
Special metadata vdev can only be removed if your pool consists of mirrored or single vdevs. A single RaidZ vdev in your pool makes it impossible to remove other vdevs.
I tried with "-s SX6012" as well, but it did not work. Just using 1 to make a copy worked. But after copying the patched FRU the mlxi2c command does still not work. Might need a reboot or something else?
mlxi2c show devs -v
Oct 13 21:48:59 INFO LOG: Initializing SX log with STDOUT as output...
The guide uses that command to get the current FRU. From section "Get current FRU" before "Send the updated FRU to the switch"
Or am I missing something?
When trying to convert a EMC 6012 using dodgy routes guide I have issues when trying to detect the FRU Bus number
mlxi2c show devs -v
-E- mlxi2c: mi_opend Failed status(MLXI2C_AUTO_DETECT_FAILED:21)
Any ideas?
Cisco has tow different wifi series, Catalyst and Meraki.
Catalyst 9800 has a few different API alternatives: Catalyst 9800 Programmability and Telemetry Deployment Guide 16.10
Meraki getClients: Cisco DevNet
CrystalDiskInfo shows a overall health status, power on hours and other useful info. A lot of ebay sellers add a screenshot of CrystalDiskInfo when selling disks.
EVC is only required for live vMotion. When a VM is power off there is no issue powering it on again with a different CPU.
Different bios settings can cause issues, such as enabling/disabling AES NI.
vMotion between cpus with the same instruction set shut be no issue. In my homelab I can...
I am trying to do SR-IOV with a Mellanox ConnectX-4 in a Supermicro X9DRI-LN4F+ running vSphere 7.
Under pyshical adapters it shows the following:
SR-IOV
Status Enabled
Number of virtual functions 4 (0 currently available)
mlxconfig shows SR-IOV enabled in the firmware...
That is not entirely accurate, you cant get QSFP-BiDi transceivers that do 40Gbit on single pair multi-mode cables.
Example: Cisco QSFP-40G-SR-BD Compatible 40GBASE-SR BiDi QSFP+ Transceiver Module
Edit: Cisco also has a 100Gbit QSFP28 transceiver with LC connector that does 100m with OM4 MMF...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.