Search results

This is just one example of one that works, but any HP common slot PSU will likely work. HP 460W POWER SUPPLY 643931-001 643954-201 660184-001 Platinum Plus HSTNS-PL28 See here for pictures HP 1200W Platinum Plus Hot Plug Power Supply - 656364-B21 660185-001 is another one I haven't tried but...

By the way, these work fine with HP common slot PSUs. There is a "notch" on the top of the cage which differs in position between the HP model and the Huawei one, but when you've cut that, it is recognised and more than a little amusing. It also is a lot, lot quieter than the default 750w one...

Alligator clips are universal - since you have the main power coming from the ATX connectors, they don't need to provide much power. I have not tried running them without attaching the hotplug board power.

I use it with the fan board to get the fans connected :) And because they came as full trays. If you're getting the beep sequence, it is powering on - it just believes the voltage isn't present or high enough at the hotplug power connector. I assume you are putting 12v across that as well...

It works fine. PS_On connects (momentary) to ground, clip or unclip the red wire running to the fan board (this is the power good line from the hotplug controller on the fan board).

If you search 't' internet, you will find someone very helpfully saying "oh, yes, you can run these outside a chassis but it's difficult - I'm doing it" but not explaining any further. This board works fine with 12v, 5v (standby) and 3.3v powered. Fortunately my boards came with the risers...

So, a little more info on these. I _think_ these are meant for the C6220 based on part numbers. However, they do *not* function (as in, they do not appear as PCIe devices) on the C6100. On the plus side, they come with complete mounting kits - and the 0JKM5M riser. They're based on the iba7322...

I wouldn't describe it as loud - it does the usual full-speed-fan dance, but if you have both power cords plugged in, it quietens down quite nicely. ISTR it draws about 80w unloaded - that's with the back 2 10GbE ports populated too. There are some firmware updates available from IBM, if you...

Intel QME7362CK TRUE SCALE FABRIC INFINIBAND HOST ADAPTER - these would appear to be for the Mezz slot in something similar to the C6100. At this price, it's worth a punt! Intel QME7362CK TRUE SCALE FABRIC INFINIBAND HOST ADAPTER MEZZANINE CARD DELL | eBay