Search results

I was reading this about doing it yesterday. Conversion of a Cisco UCS 6120XP to a Nexus 5010 • r/homelab Sent from my XT1650 using Tapatalk

I'm looking for 2x 160GB to 200GB SSD to be mirrored boot drives for my ZFS SAN to replace my cheap failing SSDs. I have been looking at the Intel DC S3500 SSDs but if someone has a better drive I would take that too. I'm trying to stay under $100 USD for both but I'm not sure that's...

I'm seeing that more now that I would need more nodes to use Ceph well. In my little testing on my spare server with only one osd and 1gb nic. I was getting about half the max of the drive. I'm looking into the VSAN products, I didn't thinking about them working when I moved outside of VMware...

I have been looking at the Mellanox ConnectX-2 and Intel X520-DA2 NICs. Is there a huge advantage to getting the Intel NICs. I have seen a few issues with the ConnectX-2 and Windows 10\Server 2016 but nothing major I can't live without or changing firmware won't fix. The price difference is...

I think that's what I'll start with then. I haven't seen any 10gb switches that would fit my budget. But the mesh setup should work, just need to look into what NICs and DACs I can get cheap that will work. Sent from my XT1650 using Tapatalk

And that's what's I was thinking would be my biggest limiting factor would be the networking and was trying to figure out how much they would limit me. Right now I'm fine as long as I can max a 1GB connection but I have read that might not be possible writing to 2 nodes and the EC. But I don't...

A background. I currently have a one NAS/SAN that is running Omnios with Napp-It exporting storage on NFS and iSCSI to a 3 node VMware cluster. Something is up with the storage box and I have given up with trying to figure it out. It doesn't like to connect and I can't get above 1GB but it works...

Thanks, that's what I was figuring but I was hoping I wouldn't have to. Sent from my XT1650 using Tapatalk

Right now I have Omnios with Napp-it installed on 2 500gb HDDs that are mirrored. I would like to move my rpool to 2 60gb SSDs so I don't have to waste drive bays. But I don't see any easy to do this. I have room to connect the drives now so I could do a zfs send / receive but I haven't found a...

Yeah my dad has a one of the ap9619 cards which is basically the same just has sensors inputs and it was a pain to get reset and change the IP as it wasn't factory reset when we got it. If it is factory reset when you get it is much simpler I think just that DHCP option to have it take the...

As for question 2 from my research to get one also, that card should work but also the new NMC2 cards should also work from how I read it. APC reference: APC UPS Network Management Card (NMC) Compatibility Chart

Well I should have looked into that more but I can see why I missed it. SFP vs SFP+... That does not kill it as an option but it limits it's options, it gives it a max of 4 10Gb SFP+, 2 included with that eBay seller and you could add anther 2 on the addition add in card slot.

Has anyone looked at Force10 switches, I was browsing eBay when I found a Dell Force10 S60-44T it has 48 1GbE ports and 4 built in 10Gb SFP+ and 2 more 10Gb SFP+ with an add on card all for $385. I am sure this would be loud as its a datacenter product but seems pretty cheap for 6 10Gb SFP+ and...

You are needing the one called "vSphere with Operations Management Enterprise Plus" for the hosts.

I wonder when and how they will start deploying the vSphere 6 products they just announced today to the EVALExperience customers. I am trying to hold off till they figure that out, I don't want to be stuck with 5.5 for a year.

I would think about moving Plex outside your storage VM, They will be competing for resources and it will be much harder to control them. I would run Plex in its own VM so you can control the resources it has much better and it doesn't try to take them from ZFS or the other way around. This is...

I am too, I would only be able to license one of my hosts which defeats a lot of the point of this. I would have thought this would be a quick fix but it doesn't look like it is....

An update: I have given up on running from a flash drive. It booted but it was very slow and somethings didn't seem to be working correctly. I installed it on a small SATA drive and it much quicker on boot and normal use.

I created a flash drive last night, I used a SanDisk Cruzer Fit that I have been for my ESXi installs and it took an hour to copy over the 12GB .VHDX. It is really slow to boot but it does work and I was able to start a VM so Hyper-V does work. Now I'm trying to figure out the networking, I...

I know FreeBSD works better on ESXi, but I would like to try out Hyper-V and I know pfSense works on it due to the main site post from Patrick. I have two of those server, one will have pfSense that is my core router for my network. This one I think will end with ESXi but I will test Hyper-V...