Ordered a H11SSW-NT board from TUGM4470 on ebay which was my first time purchase with him. He was really helpful in getting many of my questions answered and was quick to turn things around. The board was well packaged and shipped via FedEx.
If a request to buy all 38 DIMM's still gets you a price of $25 each, it is time to move on. So I wished him Good Luck.
Again thanks to all on this thread who helped me in connecting me with the sources.
I did get some of my RAM needs from other sellers on Reddit, so I am going to close this...
1. Thx, Any recommendation on what DAC / cable I should buy?
2. Can you please share the details of your Cisco transceiver and if the cable I have will work?
3. Good to know.
I am looking to upgrade my 10G network to 40G and looking into some of the threads here I was leaning to get a Mellanox SX6036 switch to meet the need.
Before I order the unit and assuming it is Ethernet enabled, I do have a couple of questions
1. What QSFP+ to SFP+ DAC cable do I need if I...
@klui
Thanks for response.
So a couple of additional questions.
the link for the Management tool points a Redhat only version, is it not available for other OS?
I have seen references in some threads here about an EMC variant (black front) of the SX6036 that can be cross flashed to Mellanox...
I recently got my hands on a Mellanox IS5023 switch which I believe is a 16x 40Gb Infiniband switch.
I currently have
a Juniper EX4300 switch that serves my current networking needs.
a couple of ConnectX-3 MCX354A-FCBT 40GE cards and MC2207130-0A1 cables
For the purposes of testing I plan...
@RAINMAN
I have some of the Supermicro cables that would work with these boards. Please note these cables are new.
Supermicro CBL-SAST-0531-01 Internal MiniSAS HD - MiniSAS HD SFF-8643 80cm Cable
Qty 5
$12 each + shipping
Supermicro CBL-SAST-0507-01 MiniSAS SFF-8087 to MiniSAS HD SFF-8643...
that was my feeling as well. But that is the file that is contained within the firmware folder of the official download
firmware >> SAS9300_8i_IT >> SAS9300_8i_IT.bin
SAS9311_8i_IR >> SAS9311_8i_IR.bin
below is the output from the commands
sas3flash -o -listall
Num...
After upgrading the firmware to V16 IT mode has anybody tried to flash it back to IR mode successfully?
I have tried the following steps to load IR firmware with no success.
sas3flash.efi -o -e 6 <-- even tried with -e 7
sas3flash.efi -o -f SAS9311_8i_IR.bin -b mptsas3.rom
it results in a...
I am looking for the following
1. Micron 3400 512G/1T. Qty 2
2. HGST 800G HUSMM8080ASS200 or the 1.6T. Qty 4.
If anybody is willing to sell please send me a PM with the price and health information.
thanks for looking.
@Markess
I think Supermicro CBL-SAST-0699 would be the right cable for this connector?
@gregoinc
If you are looking for these cables, let me know I have a couple of them.
All Items will ship from US, Illinois
I have the following items available FS
Supermicro AOM-SAS3-8I8E with 2 x SFF8643-SFF8643 cable (cbl-sast-0531-01)
please specify if you want LP or FH bracket
Qty 25
$30 each / $25 for Qty of 5+
Supermicro CBL-SAST-0531-01 Internal MiniSAS HD -...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.