Search results

  1. M

    Flash M5014 to IT mode?

    Hi guys, is it possible to flash IBM M5014 to IT mode? I know M5015 can be and I already have LSI FW (IR mode) on M5014, but for ZFS, we need IT mode.
  2. M

    [SOLVED] Change MAC address on Quanta LY2R

    Hi guys, can anyone help me permanently or temporarily change MAC address with U-Boot on Quanta LY2R? This does not work: => setenv ethaddr CENSORED:AA => saveenv Saving Environment to Flash... Un-Protected 1 sectors Erasing Flash... . done Erased 1 sectors Writing to Flash...
  3. M

    [SOLVED] Looking for 7.39.00.00 mptsas2.rom (need to get aroud NMI red screen error in HP Gen8)

    Hi, i got HP DL380p Gen 8 server. I bought Fujitsu D2607 card and flashed it to LSI firmware in IT mode as shown here: https://forums.unraid.net/topic/57815-fujitsu-d2607-8i-crossflash-to-lsi-9211-8i/ Now I have a NMI error and am looking to replace 7.39.02.00 mptsas2.rom with non NMI error...
  4. M

    2 x interconnected Quanta LB6M won't forward tagged VLAN traffic over LAG

    Hi guys, I have two Quanta LB6M connected together in LAG with LACP. Only the pvid (default) VLAN traffic is getting passed through their inter connection (LAG 1/1), all other VLANs work only on specific switch, do not get relayed. Can you share your config, if you have it working?
  5. M

    HW RAID card for QSSC-2ML with DA0S2MMB8B0 mobo

    Hi guys, I have two Quanta QSSC-2ML servers with DA0S2MMB8B0 motherboard and 2 x E5 - 2650 CPU. They were very cheap to buy. Because of the BIOS bugs (and lack of BIOS updates) in order to use them with ProxMox (PM by default creates GPT with EFI and BIOS/boot partition which DA0S2MMB8B0 BIOS...
Top Bottom