Search results

  1. R

    Old school Quanta Mesh LB9A aka Pronto 3290 aka Pica8 3290

    I already thought of trying that, went and downloaded the pronto and picos archive files for the 3780 but in the boot folder I did not find uInitrd2m. So when I tried to load the kernel at 1000000 and device tree at 4000000 it complained that it can't find the ramdisk, which makes sense...
  2. R

    Old school Quanta Mesh LB9A aka Pronto 3290 aka Pica8 3290

    Thanks, I did try to load to the memory locations as you suggested to ffd00000 ff000000 ffee000000, however I am getting: Wrong Image Format for bootm command Error: Can't get kernel image If I try 1000000 2000000 4000000 then process starts and it hangs after loading the device tree. => bootm...
  3. R

    Old school Quanta Mesh LB9A aka Pronto 3290 aka Pica8 3290

    Here is what happens when I boot and if I interrupt the process. U-Boot 2009.06 (Apr 19 2011 - 12:54:10) CPU: 8548, Version: 2.1, (0x80310021) Core: E500, Version: 2.2, (0x80210022) Clock Configuration: CPU0:999.990 MHz, CCB:333.330 MHz, DDR:166.665 MHz (333.330 MT/s...
  4. R

    Old school Quanta Mesh LB9A aka Pronto 3290 aka Pica8 3290

    That's great, thanks for sharing. I have LB8 switch and would like to load Indigo on it as well. However on my switch the linux kernel on the flash does not recognize the sd card, so I can't use the sd card to boot from. So I used tftp to load directly to memory, however image does not boot ...
  5. R

    Quanta LB8 48x10G - $375

    Were you able to load this? I have two LB8 switches and want to change the speed to 1G on some ports and the commands are different than the manual and don't work, so wondered if you were able to change things? My units don't have the CF cards, so I guess if I load anything I should install CF...