If anyone is interested here is the m720q lenovo tiny next to my fitlet2 for size comparison.
Low powers and Fanless device. Was running untangled on it without any issues.
My fitlet2 has the following spec
E3950 Atom processor
8gb ddr3l ram
2 x 1gb intel nic
1 x 1gb POE Lan...
Ok, I did a quick install with sophos xg V18 on the tiny with x550-t2 nic and it picked it up fine. I did not actually configure it as I already have another installed in my system, but the fact that it picked it up say that it should work.
If I reconfigure my system in the future I will check...
Here is the tech spec for the m720q.
It is pcie x8 but the prices from.
I bought it via ordered via Superbuy the following Taobao item, so it was $30 plus shipping (if I remember correctly) but could not find it from a UK supplier.
Here on the pictures of the m920x cover with top fan vent (which is meshed for dust protection) next to my M720Q cover. It can be used with the nvidia p1000/p620/p600 gpu card.
I can confirm the cover of the m920x fits fine on the m720q unit I have.
I don't have a nvidia p1000 yet so be able...
I changed the connection and removed lag and just have a single 10gb connection now. Keep it simple.
I have used qnaps for over 10 years now and seem solid but I always buy the SMB/enterprise version and not the cheaper on.
I have the TVS-871 and have changed the fans to noctua ones so it is...
Would you know if the M920X lid cover with cutout for gpu work with the m720q?
I have another m720q which I want add a nvidia p1000 gpu to.
Another pcie riser is on the way and already have the bracket for the nvidia gpu.
Got my i350-T4 on my M720Q installed with sophos xg firewall.
Edit: I forgot to mention I bought the baffle and 01AJ940 via superbuy and bought an upgraded power block from ebay.
I have a x550-t2 10gbe which I might try when I get chance.
I have two Intel X550-T2 Intel Ethernet network cards RJ45 in LAG (20GBe) config but the performance seems quite slow compared to what it should be.
I have the following Hardware
Qnap (8 bay) - i7 / 16gb ram / Raid 5 / intel X550-T2 RJ45 (LAG) -> Unifi XG-6poe (10GBE) -> Windows 10...
My friend just got the Virgin 1gig service and got a Dream Machine Pro which has 10gig WAN port (SFP+) + 1gig WAN RJ45 and 8x1 gig ports he gets 950Mbps on his connection.
Pfsense, untangle it will depend on what you have enabled and the hardware spec eg if you have IDS IPS protection it will...
Thanks for the replies.
Sorry for the confusion in the end the new main PC would consist of the below.
Main PC (Micro ATX case)
SuperMicro X10SDV-TLN4F (Onboard 8 Core 16T CPU / 2 x 10 GBe)
128GB DDR4 RAM 2133Mhz
512Gb Samsung 950 NVME -> change to 1TB NVME
TB Samsung 850 SSD - for...
I just have my Plex and Emby servers running on my Qnap (i7 / 16Gb Ram). My friends and family can also transcode in HD outside the house (only have 20 meg upload) around 3 I have seen transcoding in HD.
4K will transcode with both Plex and Emby but cannot do HDR tone mapping so will look...
Currently I have two PC's one my main PC I use for daily use and video encoding and a second one i have Esxi installed and is purely for learning and testing hence why its is hardly switched on.
Main PC (Micro ATX case)
Gigabyte Sniper G1 M3 - Z77 Motherboard
32GB Trident X...
new to the forums, but i have just bought a IBM 5014 card but just realised on the specs the it does not support JBOD, is this something that was introduced in later firmware? or is there any way i can enable this function on this card?