I think this type of setup has been discussed previously in this thread many times. Don't remember where/when or what the results were but I know this is a common question with the 4-in-1 style systems. I also know it's talked about outside of STH.
I would think so if they're able to go the other way II chassis w/ I sleds. But I would definitely see if more info is available online before I pulled the trigger or at least found a place or eBay seller w/ free return shipping.
I know there were very minor revisions between I and II but can't...
Oh, well now I feel like an asshat typing out all this detailed info LOL.
I would't want any server sitting in the room with me, nor a switch for that matter but sometimes you gotta do whatcha gotta do.
(Assuming you have IPMI access..) What are your fans' RPMs and temps? (Found under Sensor Info but you probably already know this)
My fans are sitting at low 8000ish RPMs
Temps (All Celsius)
So my server rack is in my laundry room (best place I...
Noticed something similar too. I have a C6220 II enclosure (got it on eBay, came refurbished from dell and the thing was spotless, ZERO dust). It's not listed by Dell but the C6220 I gen and II gen sleds are compatible. Little less interesting than your finding as the C6320 vs. C6200 seems more...
The model # of the ECC DIMMs is: Kingston KVR1333D3D4R9S/8G -- There are 4x DIMMs per sled. 8x4x3 = 96GB Total
The link to the photos include a picture of both PSUs.
The sleds go into the chassis and it powers on and works assuming you've installed a drive w/ an OS or it'll just POST.
ITEM HAS SOLD
Selling C6220 chassis + 4 sleds with the following layout:
Dell Poweredge C6220 II Chassis--Dell Service Tag: B970DZ1 --- The Chassis was BRAND NEW when I bought it last year. It's sat in a rack ever since. No damage..just a bit dusty
1x Dell Poweredge C6220 Motherboard sled +...
Hmm, interesting problem. Haven't encountered this myself so I won't be much help to you. I'm assuming you've tried to reset the CMOS? You may have tried this since you mentioned the power but...have you tried pulling both of the main AC power cables from the chassis and letting it sit for a few...
Thanks for the detailed response. Have the drives sold? If not then could you elaborate on the "can drop from RAID b/c of firmware" is that the Rocket card firmware or the drive firmware? Smart data looks good on the drives
Looks like a nice setup! What was this used for? I know nothing about the RocketRAID card. Their site lists lots of RAID modes plus JBOD..do you know anything about this? What mode(s) have you used for it? Do you know how the attached drives are presented to the OS in JBOD mode? I could always...
Seems like the easiest way to mine Monero is to just docker pull some sketchy images from random users on the Docker hub. They'll start mining for you right away without you even knowing! ...just not to your wallet :)
Just wanted to say thanks for the write up(s.) I especially liked looking at your first build, the original RAIDZilla. In that 11yr old article you commented on how amazing it was to have 2GB DIMMs in such a small physical space! I guess I'm just used to it by now but it's truly amazing how much...