Can anyone explain the following to me:
Inside the VM the drive shows a usage of 149GB. When I select all folders on that drive I get a total of 5GB.
When I look at the VHDX file on the hosts file system the size is about 5GB - the 5GB pretty much reflect what I copied to that drive over the...
Hello dear forum members
I just benched my virtual server and the VHDX which is meant for the file storage isn't performing very well.
The bare metal SSD RAID gets around 515MB/s for files sizes of 256kb and the VM only achieves 439MB/s - IOMeter 100% random read. The smaller the file sizes go...
I am setting up a RAID for a file server. It is supposed to be a RAID 6 with 9 SSDs and it will replace a RAID 10 with 8 HDDs (7200rpm).
The files we store are pretty small:
10% below 32kb
5% between 32-64kb
60% between 64 - 300kb
25% above 300kb
and like 2 % above 1MB
files are written...
I use a 9460-8i RAID controller. It is connected to a Chenbro SAS Expander with LSI 3x 36 chipset
via 1 MinSAS connector available on the controller.
In Broadcom LSA the connection status says that is connected to the backplane with 4 channels.
I am using 9 SATA SSDs in a RAID 5 and the RAID...
Since the primary question was resolved quickly I changed the title to the 2nd issue which I had :
I simply cannot login into LSA with my admin credentials on my Windows server 2019.
I just tried to setup my new server which has a LSyi 9440 8i Raid card.
I have 2 issues:
1 I can't...
I need to replace our storage server which hold medical images (PACS server) of about 13TB.
The server isn't mission critical as we also have an enterprise PACS but the server works as secondary backup and image router as well as VPN access - so loosing all the data would actually...