Search results

  1. Tha_14

    [Needed]Dimensions of a Dell Poweredge M600 Chassis

    If anyone has a blade( doesn't have to be a M600) and can measure the width, length and height of the chassis I would be very thankful. System board dimensions would also be very helpful. I found these at a local shop so I might pick one up for a case mod. Thanks!
  2. Tha_14

    HP ProLiant DL160 G5 Windows not detecting NICS.

    I got this server motherboard which I managed to make work with aftermarket fans a while ago. Nics are working fine under linux but Windows do not detect them at all. I really need the gigabit as Im moving the workstation to the office next week. I have upgraded BMC and NIC firmware to the...
  3. Tha_14

    [SOLVED]I Got an HP ProLiant DL160 G5 and its not detecting any fans.

    Sorry if this thread is in the wrong section. So I've got myself an HP SE1210 Motherboard a while ago from ebay(together with the pci-e 2 riser card) and I've been struggling ever since to make the fans work(I have 5 fans plugged in to the motherboard, 2 are 3-pin fans and the rest are 4-pin...