Search results

  1. M

    1U Supermicro Server 6x 10GBE RJ45 X10SLH-LN6TF LGA 1150 H3 X10SLH-N6-ST031

    thanks ended up having to factory reset with -fdl since -fd 3 didn't do anything
  2. M

    1U Supermicro Server 6x 10GBE RJ45 X10SLH-LN6TF LGA 1150 H3 X10SLH-N6-ST031

    Okay I need some help or suggestion. I didn't realize the IPMI port on this motherboard is dedicated. Thinking it was shared (Cause I need more ports) I set it to share. Now I can't get into it. Even in the BIOS all hose settings are blacked out. Suggestion?
  3. M

    Brocade VDX 6740

    alright I need more help... I am trying to setup in-bound management so I don't need a cable connected the management port on the VDX. I have been using these examples: How to configure management port in VDX 6740? : Brocade (reddit.com) Q A: How to configure in-bound management for VDX platform...
  4. M

    Brocade VDX 6740

    woot the port channel works now. However the 2nd cable I have is actually bad but all is well with redundancy :)
  5. M

    Brocade VDX 6740

    I am remote right now to physically attach the second cable but will try setting the port-channel speed to 40000 and hopefully makes a connection. sw0(config-Port-channel-1)# do show running-config interface Port-channel 1 interface Port-channel 1 vlag ignore-split speed 40000 mtu 9100...
  6. M

    Brocade VDX 6740

    this is mine interface FortyGigabitEthernet 1/0/49 channel-group 1 mode active type standard no fabric isl enable no fabric trunk enable lacp timeout long no shutdown ! interface FortyGigabitEthernet 1/0/50 channel-group 1 mode active type standard no fabric isl enable no fabric trunk enable...
  7. M

    Brocade VDX 6740

    It is working. I initially tried to set port 1/0/49 & 50 as LACP Uplink. But when I put it in a regular non-configured port it is staying up. So my skill in setting up a LACP on the VDX is the problem. I think I need to revisit on how to set up a port-channel LACP
  8. M

    Brocade VDX 6740

    yeah it negotiate for a bit and then it just shuts off. when you do a sh int status and it say it's admindown. My Celestica DX010 link lights goes off and the VDX shows a amber blinker UPDATE: It is working. I initially tried to set port 1/0/49 & 50 as LACP Uplink. But when I put it in a...
  9. M

    Brocade VDX 6740

    I just tried some CISCO-MERAKIs DAC cables and they don't work either. So the only way is to get AOC or tranciever and optic cables? 2021/12/21-17:57:37, [NSM-1042], 1656, SW/0 | Active | DCE, WARNING, sw0, Unqua lified SFP...
  10. M

    Brocade VDX 6740

    so anyone have any recommendation on QSFP COAX or AOC cable that will work with the VDX?
  11. M

    Brocade VDX 6740

    I stuck the cable (the splitted end) into my DX010 w/ SONiC and this is what it show: admin@dx010:~$ show interfaces transceiver eeprom Ethernet0: SFP EEPROM detected Application Advertisement: N/A Connector: No separable connector Encoding: Unspecified Extended...
  12. M

    Brocade VDX 6740

    sw0# show logging raslog | include Interface 2021/12/07-18:17:45, [HSL-1012], 1, INFO, VDX6740T-1G, Interface lo is link up 2021/12/07-18:17:45, [HSL-1012], 2, INFO, VDX6740T-1G, Interface eth0 is link up 2021/12/07-18:17:45, [HSL-1012], 3, INFO, VDX6740T-1G, Interface eth1 is link up...
  13. M

    Brocade VDX 6740

    okay I am coming to a problem with the QSFP port being "adminDown". I have a dell QSFP28 that breaks out to 2xQSFP28 (100 to 2x50) I think it should drop down to 40Gbps..... Anyway to get module information on the VDX? Or get this working? Or I need a specific breakout cable? I have the...
  14. M

    Brocade VDX 6740

    doesn't look like base64 so nope don't know what to do with it.
  15. M

    Brocade VDX 6740

    got the licenses added in but it seems like I need to do a dpod reserve ... is there fast way to reserve all the ports? I tried dpod 1/0/1-1/0/48 or 1/0/1-48 or 1/0/1,1/0/48 those are unknown argument. Suggestions?
  16. M

    Brocade VDX 6740

    Thanks everyone. I was able to make the USB drive and load the 7.4.0a in this thread. going to install them licenses and hopefully start building out the VLAN to replace the powerconnect 5548 with this VDX
  17. M

    Brocade VDX 6740

    but do I still need a Brocade Brand USB? or the steps they show is to make a USB drive by-pass/mimic the Brocade Brand USB?
  18. M

    Brocade VDX 6740

    I just read the instructions. Since it involves an USB does it have to be brocade brand? Another question. I *think* the switch might have recovered it self over night (I let it run all night) I finally was able to login to it. Was going to try to upgrade the firmware, but I got stuck. I am...
  19. M

    Brocade VDX 6740

    Maybe someone can guide me to the right direction. I just picked up a VDX6740T, when it is booting it keeps boot looping itself. I see some of the message saying it's trying to repair itself. What should I do? can I just reload it and start from scratch? Restoring DCM databasetp_register...
  20. M

    Brocade VDX 6740

    would you like to share your latest firmware?