unfortunately i dont have a terminal log.
I know i flashed the network enabled uboot (hopefully correctly but the total absence of info coming in via UART lets me doubt that).
I also deleted the miraki OS partitions.
Via the terminal i then set the ip to something in my reachable range and...
I followed the guide in the merge request but omitted the step "Proceed to flash the sysupgrade image...".
I was so happy seeing the usual openwrt luci frontend on screen that i unplugged the device to close the case.
Now it does pretty much nothing not even write anything on the UART. Do i own...
I would love to see an openwrt variant for the mr52. Personally i lack the knowledge for any real engineering work, still if there are things to support iam willing to help. Is there someone on board who could take on this challenge?
Here are some of my findings:
* /proc/cmdline does exist
root@OpenWrt:/# cat /proc/cmdline
ubi.mtd=art root=/dev/ram rw console=ttyHSL1,115200n8 mem=0x1ea00000@0x41500000
* /dev/ubi* devices are present
root@OpenWrt:/# ls /dev/ubi
ubi0 ubi0_0 ubi_ctrl
* ubinfo is not available. These...
Allright here is some output from the commands
root@OpenWrt:/# cat /proc/mtd
dev: size erasesize name
mtd0: 00200000 00020000 "art"
mtd1: 00136000 0001f000 "ART"
root@OpenWrt:/# ls /dev/mtd*
/dev/mtd0 /dev/mtd1 /dev/mtdblock0
/dev/mtd0ro /dev/mtd1ro /dev/mtdblock1...
The good folks at Meraki just send me this:
The open source you requested for the MR52 can be downloaded at
Instructions for building the OpenWRT source code and the Linux kernel for the MR52 are below.
After downloading and unpacking...