Search results

  1. N

    Napp-it - NFS Read bottleneck?

    I've noticed lately that once there is some load on the server, there seems to be a heavy (random?) read bottleneck that I really do not know how to put my finger on. dd writes seem to be ok, but reads either get stuck or something - not quite sure at this point. eg. around 3-4 Plex streams...
  2. N

    NAPP-IT log errors - too many connections

    odd - appliance tuning always worked (for years) for me right up until now when I updated to 19.x homeversion... Anyway here is /etc/system... * napp-it_tuning_begin: * set my tuning option default * enable sata hotplug set sata:sata_auto_online=1 * set disk timeout 15s (default 60s=0x3c) set...
  3. N

    NAPP-IT log errors - too many connections

    @gea I was just going to show you the appliance tuning option page I am (was?) using (your default performance one) - but it seems you have removed that feature in the latest home version of napp-it? I just updated before to your latest 19.x home version.... so I downgraded back to 18.12q but...
  4. N

    NAPP-IT log errors - too many connections

    Going through the logs, not quote sure what is causing these errors - attempted a google search but didn't come up with anything about it (suppose it's a tricky search) Jan 31 08:55:57 batcavefs /usr/lib/nfs/nfsd[631]: [ID 696744 daemon.warning] too many connections (5), releasing oldest (11)...
  5. N

    ZFS Benchmarks - how to they look?

    I have one 8x slot left on my Mainboard and I was thinking of using an Supermicro AOC-SLG3-2M2 - would a single DC P4801X be sufficient?
  6. N

    ZFS Benchmarks - how to they look?

    Fantastic, thank you both for the help!
  7. N

    ZFS Benchmarks - how to they look?

    Hi Gea, thanks. Can I assume I need a separate Optane for every Pool or can one be used for more than one at a time? Also re. recsize would I have to move data off and destroy the pool to change it? I very much appreciate the time you took to look and write your response. I will look for...
  8. N

    ZFS Benchmarks - how to they look?

    I'm trying to optimize my file server - but not sure if I am even seeing reasonable performance as it is, so maybe someone can look at the benchmark results below and let me know if I am in the ballpark of what should/could be expected? Napp-it 028_v4 is running in a VM (ESXi 6.5) - controllers...
  9. N

    Permissions help - Writing via NFS, SMB W/X ok but unable to delete?

    Hi Gea, I thought so too - and I have done this as noted above but even after resetting the ACL's through napp-it I cannot delete these specific files/folders unless I am root on the napp-it server via ssh or via root-ssh on the other server that is connected to the share via NFS. I can...
  10. N

    Permissions help - Writing via NFS, SMB W/X ok but unable to delete?

    OK even stranger now.... It doesn't happen with all folders created by the NFS write... So maybe it is not a permissions issue after all and something else is happening? Maybe something is actually keeping the files/folders open (even though I never open anything)? Is there any tool to check...
  11. N

    Permissions help - Writing via NFS, SMB W/X ok but unable to delete?

    The issue is that making a file/folder in windows (or by root users from napp-it shell) does not have this effect. So I do not see how it can be an ACL/permissions issue set by windows or napp-it server. As you can see above the ACL's are correct. Only new files/folders made/copied by the...
  12. N

    Permissions help - Writing via NFS, SMB W/X ok but unable to delete?

    I seem to have mucked something up somewhere permissions wise - Everything works as I think it should I can open/run the files/folders except when I go to delete files/folders via SMB (Windows) - it just doesn't delete. No errors, no complaining from Windows at all. It just doesn't do anything...
  13. N

    Looking to update OmniOS/NAPP-IT from r151014

    Sorry if I seem thick.. I just don't quite follow. Do you mean I should install Solaris (say on a new VM), install the utils on it and then extract the files and copy to my OmniOS VM? EDIT: I cannot seem to install it on Solaris either...
  14. N

    Looking to update OmniOS/NAPP-IT from r151014

    I've searched for a few hours on how to compile it all on OmniOS but I'm probably just not that smart. any sites you can point me to that would help me get that done?
  15. N

    Looking to update OmniOS/NAPP-IT from r151014

    No it is your latest v4 template for Napp-it/Omni-OS
  16. N

    Looking to update OmniOS/NAPP-IT from r151014

    I'm having the same issue as before... it can't find the package?
  17. N

    NAPP-IT - Moving whole pool - DATAMOVER or no?

    Alright then, thank you for the info. I'll use mc via the console to make the simple move instead of the rule based datamover now that you've explained it. Cheers!
  18. N

    NAPP-IT - Moving whole pool - DATAMOVER or no?

    Hi Gea, wondering if I should consider using the datamover tool in napp-it for transferring all of my data from my existing pool to my new pool? If yes can I just choose the pool (no specific folder/ZFS file system) or do I have to do it file system by file system? Or is there a better way to...