Search results

  1. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Anyone has any info on CWWK AMD 8845HS board? Manual maybe at least? )
  2. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Did they password-lock bios folder on support site? Cant open it.
  3. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Installed n305 board in Jonsbo n2 case with Jonsbo HX6200d cpu cooler. Cooler fan is just below upper vent holes. Which way is it better to orient the fan - blow up out of the case or down towards heat sink ?
  4. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    The problem is that it is difficult to measure the gap between cpu and the sink. But we know that Chinese makers are quite relaxed about precision and quality (no offence), so we can assume it is big enough. And though Cgpt indeed reports a test simulating 0,5 gap where tpaste performs better...
  5. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Of all options trying to fix this heat spreader gap problem tpad is the way, imho. Tpaste is not an option at all. Copper shim is troublesome as it is problematic to determine what thickness to use, unless you have a selection and ready to go trail & error risking breaking die in process.
  6. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Interesting. Though I doubt about boot time power consumption. 7 hdds spin up should be alone close to 100w, for a few seconds.
  7. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Btw did you put tpads on dyes only or on the whole raised copper plate?
  8. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Thank you! Guess I will have to go tpad road as well, just not sure what thicknes, no 2 boards are the same. Probably will go 1mm to be sure. I plan to use Jonsbo HX6200 with Noctua fan on top, been reading it fits ok.
  9. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    How did it look initially? Was tpaste in enough contact with the plate? Would be awesome if you could run some tests on it now )
  10. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    You cleaned the chip or it was like that?
  11. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    The important question does it do the job and transfers the heat? Any thermal readings under load?
  12. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    If I plan to boot from usb, should I choose Sata/no-sata version?
  13. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    I assume this is BIOSes for purple K board: https://pan.x86pi.cn/BIOS%E6%9B%B4%E6%96%B0/3.NAS%E5%AD%98%E5%82%A8%E7%B1%BB%E4%BA%A7%E5%93%81%E7%B3%BB%E5%88%97BIOS/4.%E7%AC%AC12%E4%BB%A3AlderLake-N%E5%8F%8C%E7%BD%91N100-N305-NAS-K-BIOS 24/6/24 looks like the most recent one.
  14. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    There are 2 internal usb 2.0 ports on purple board. Manual says one is data and one is charging only. Which is which?
  15. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Is it possible to boot from SD card? Specifically boot Xpenology loader from it?