Search results

You are wrong! Midplane in MD1200/1220 and MD1400/1420 are the same - 6G. Cause this is Netapp E2600/E2700 series (Dell is used as OEM seller). Port SFF8644 on EMM don`t provide 12G for connection to disk cause this is role for midplane. This is One model of chassis. Of course you can use EMM...

1. cause you made a backup in recovery-procedure, you can always restore it to original. Plus I didn`t see that you made changes in /mnt (on second partition). If so , you can get original from it. 2. You can use tftp to boot kernel and use firmwarecleaninstall. 3. I can upload 8G image to...

Cause in 16G swithes ttl-files are changed every boottime, there is no reason to edit it with "printf '\x00' | dd of=ttl bs=1 seek=43 count=1 conv=notrunc". At least for 16G switches it doesn`t work. And person that offered it probably didn`t make firmwaredownload after this. Cause the reason...

WkhKz6.m9BfK.xu69iuY6g== for reset password there is command resetpw. yes, first need to enter any new password. then reset it to empty (work with 8G switch. but in 16G with 8.2.x OTP will work always)

reply is PH0vsuW0bNW0pahWmwYrww==

Yes, hpdcZOwBA2VMF.wBzy/IjQ== TdUJI5Xs51AyRmk8fwvE4w== ZnXDfNLgFeLY.utJ0Pg7Bg== OX6ScPMAdfSrwF.NLltOkQ==

for fuzTjClR/YG7Wg5AWtPDrA== 0UgGn2cI108GK/oOABbPaw==

for 8M0/qtyaiM8gQ.RLXxkOPg== EMimi9rYzh8gzqtSAfwa5A== While you enter right string or 3 times wrong, OTP is the same for each boot time. Then it`s regenerated.

You can write your OTP strings

6505 and 6510 use different compiled modules so you should get a lot of error about "fabos is not ready" and so if use 6505 image for 6510. This is dd-image of 6510 DropMeFiles – free one-click file sharing service Also you can use 2Gb cf-card. If switch has license, you can find it on...

This is EOS hardware and now only a few have a support contract to get last version 7.4.2m by third way. Cause if you read notice All old versions for VDX and SLX were removed from portal cause of 3rd license restrictions. can write pm for disruptive update to 6.0-7.2-7.4.1d or with netinstall...

maybe mistake in l,I,1 or space HpJaxSUYx.SwjmFUlYTlUg== O9Jq86txWtmgEdRluV/I/A==

for: FxWGWRl8G7bWeJmrlCw/6g== rep: cdiwhuw2lSsBXqhtV0Rs9Q==

for: CYdqvqL0o.mANL/7YJmXFQ== reply: A387hfYtAijN5K1KOpu10Q==

only: 1.downgrade 2. replace files on flash (but probably prom (package) need to flash manually under root after this) 3. EEOS license reply support string: for: IifsRDumJa6h6pNRj4u4Cg== reply: 3rYJes57EzBdRptufPXRzw==

everyone have 8.2.3c1 and 8.2.3d (not d1), even google. ps without full copy you can just check md5sum for all files on both partitions (except /var) but *e* only available with Certificate Upgrade License (lite version of TruFos for 32G). *edited: resolveble for you if you can share 8.2.3e2...

full data-center size SLX 91x 92x under $500. But of course without support and new fw cause this is ~2015..2017 year equipment. Some B2B can get MSN2100 with free fw updates

license key can be viewed in "show logging raslog | i license". Every boot time system writes message like "license B* xxxxx# added".

not work for 16G cause each boot time it reset bit and rewrite ttl,ttlV2 (8.2.3d) better to set eeos license.. but probably mostly jumped to 32G and there is no members of forum with eeos and fabric os Upgrade switches. need to change date and disable NTP under "single" boot (or /init/sh)...

in case of "JBOD" usage - the same behaviour: it works like a sas switch without restrtiction - only HBA card can add hdd incomptability. in case of "Storage" with E2800/E5700 controllers branding is also can be removed from demands. I don`t play with fan speed cause it just can degrade hdd...