Search results

My very favourite thing to do is "modify" old servers. This is an Acer R360 F2 (basically an Intel R2200GZ with a S2600GZ mobo). The case doesn't have a slot for a slimline ODD, where I would usually put a boot sata drive in a caddy. Also this server didn't come with a power cable for any sata...

Hi, Although I like pre-built servers mostly, I can't resist a bargain, the Supermicro CSE512 and HP ML110g9 together only came to £40. It is mostly complete, I do need an i/o shield, but the last issue is the front panel header. HP being HP there is no way in hell that they will tell me the...

Hi, probably not much interest to many, but especially in the UK, these caddies are extremely expensive. Last time I brought any they were £6.79 each on AliExpress. However, if you don't mind a bit of "bodging" then I have the answer. The LEDs work on both of the options below. Old HP (before...

Hi, I have a Fujitsu RX2530 M2 (10 sff bay) with a Fujitsu D3262-A12, PLX switch card. Much like the U.2 add on for the Dell R630 (ten sff bay). However I have never been able to make the card work. It is detected by lspci, but querying dmesg shows this message: [ 5.068084] pci...

Thanks for this, but does anyone have anything newer? ILOM 5.1.1.25.a r160153 for X5-2 perhaps?

I needed Dell disk labels and this was the first thread in a Google search. Not having the talent to design my own I carried on the search and found this: Caddy Tray Label Generator Not as good as the shiny silver ones but they do for me.