Search results

  1. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Good news! This does work for this board (https://www.amazon.com/dp/B09SZ66W3Q). I was able to power up an SSD and an HDD
  2. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    I am still searching for a solution as well. I can say that this plug fits but the wiring is all wrong. https://www.amazon.com/dp/B06ZXSNKCK There is power on the socket when powered by a power supply brick. See my earlier post with the pinout diagram. There is 5v and 12v so it's just a...
  3. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Here is mine... As you can see I have a Crucial P3 on the NVMe port 00:00.0 Host bridge: Intel Corporation Device 4617 DeviceName: Onboard - Other Subsystem: Intel Corporation Device 7270 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-...
  4. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    I have the DC version of the board but my JMB585 looks to be connect at PCIe 2x1: 05:00.0 SATA controller: JMicron Technology Corp. JMB58x AHCI SATA controller (prog-if 01 [AHCI 1.0]) Subsystem: JMicron Technology Corp. JMB58x AHCI SATA controller Control: I/O+ Mem+ BusMaster+...
  5. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    Good deal. I ordered another connector and will report back on if it works!
  6. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    This seems to be the pin-out. Taken from https://www.aliexpress.us/item/3256806271203313.html
  7. C

    12gen N-series Nas motherboard (topton, cwwk, ... )

    I received this board yesterday as well. Running the same RAM which works well. I am using a Crucial P3 500GB NVMe drive which also seems to be working well. Did you make any progress with any cables that you'd use to power HDDs?
Top Bottom