Search results

Hi RolloZ170 Tried that BIOS, but unfortunately it sticks on error 70 Regards NNN

Sorry, I was not clear. I have made several settings to the BIOS file trying to enable Bifurcation and the system has loaded after being flashed using a CH341 programmer, although my modifications have not worked. Bifurcation support is more important to me than Milan support Thanks again NNN

Many thanks for your input, it is greatly appreciated. I wont swear on it, but I think RoT is not enabled on these matchboards as I have been playing with some settings without much complaint from them I will try this on Monday and let you know how I get on

Hi I have some Supermicro H12SST-PS v1.0 motherboards running a v1.0 BIOS that cannot be upgraded any further (this has been confirm by Supermicro). In my other servers, I have Supermicro H12SST-PS v1.2 versions of this motherboard and these have Bifurcation support. Is it possible to...

Hi Where are you based, (I assume UK as prices in pounds) can I collect? Interested in at least 8 x HMAA8GR7AJR4N-XN as I believe these are validated for my motherboard H12SST-PS Thanks NNN

Hi all I have purchased a supermicro quad node server with 4 x H12SST-PS motherboards. I made the same mistake as several people in finding out Hynix LRDIMMs don't work well, so I am wondering what other people have been running in their H12 systems. Looking preferably at 64GB DIMMs and...

I would say this is very unlikely as it is more about the chipset than anything else such as the socket or BIOS.

Many thanks for your input, but when drives are attached I do not get offered any RAID5\6 etc If I run Storcli (learning as I go here) it says the card it in IT mode

Hi I recently purchased a server containing an Avago 9361-8i, but have just noticed it is in JBOD mode. Could someone point me in the right direction to get this back into RAID mode Many thanks in advance Mark