Search results

Well im just returning the motherboard to the ebay seller (tugm)

"Failed to prepare HPM components, update canceled" Thank you anyways :/

Yeah you are supposed to press Ctrl + Home when you turn on the server but.. my motherboard doesnt POST, so im on a dead end basically

Theres no HPM.... this is the zip file from the official mitac tyan web

I just got this board and it booted fine but I noticed 3 gpus were at x16 lanes and other at x8. I was checking the logs and I saw 800+ pcie AER errors using slimSAS risers... then the server started rebooting by itself and now it doesnt even POST. I can access the BMC but if I try to flash the...

Hi I got the board from tugm like 2 years ago, I decided to upgrade the BMC ( 12.61.39 ) and BIOS ( M31) from the rev 3.0 for reBAR and now it acts weird. If I turn on the server the ipmi stops responding until you shut down the whole server and it doesnt recognize new hardware on the ipmi. And...

My complete bad, I selected to flash BMC instead of BIOS and it returned an error.... its flashed correctly now altough I dont know if I have to do anything else like flashing new vbios on the 4090s, my OS is Debian

I tried to flash it via BMC and it sends an error and restores old BIOS... How can I flash it? I want reBar for p2p through 4x 4090s with this motherboard EDIT: Flashed BIOS correctly

Hi I was considering buying one of these mobos to run 6 gpus but I dont know if I should use powered MCIO risers as the gpus will require power from the pcie slots and it doesnt have an auxiliary power like some boards. My plan was using 5x 5.0 MCIO risers from the pci-e slots and then other...

I have asked an ebay seller the difference between this model and the 9654 and he told me that this one has a higher base frecuency and it supports 5200mhz memory. My motherboard is an Asus K14PA-U12 and it doesnt say anything above 4800mhz on the datasheet so I was wondering if I can put...

Can we put this model in a dual socket mobo? Could you please run a benchmark of xmrig with the configuration that you currently have? Those 2Rx4 memory sticks seems to be really fast just download the binary from here: Releases · xmrig/xmrig (linux static) and run it like this: ./xmrig...

checking the SEL on the IPMI I see this error: ID: 335 Unknown sensor of type memory logged a smi_handler : Memory Device Disabled was asserted

That's one of the first things that I tested :/

Dimms cleaned with brush + alcohol 99% Removed CPU, cleaned cpu contacts with alcohol Socket pins are perfect on the motherboard Yet, the H channel is missing T_T

Just tried it but same behaviour... H channel not recognized

Good evening guys, I was testing my new MZ01-CE1 (bought it last month with 3 year warranty). Firstly I tried to put my 7D12 with just 4 memory modules on channels: C,D,G,H. This oem epyc only has 4 channels active as many of you know but, the channel H was never detected, I tried swapping the...

Can we overclock the ram in gigabyte mobos? get 2666mhz and oc them up to 3200¿?

Hi guys I have these two mobos (both rev 3.0) and I was wondering If in case I get 2666 or 2933MHz sticks, ¿can I set them to 3200Mhz in bios? I know we cannot set higher vdimm in these mobos but would that work without touching the voltage? The CPU would be a 7B13

Nah, read the post of the other user... thats why @gb00s said that I wouldnt be able to oc it even to 3Ghz... Nah im passing on this, I will just get a 7B12 and be safe on this (I want to use it with containers in proxmox and other vm's with gpu passthrough)

okay this is not oceable and it is a 7763 ES, found this by other user in the forum https://forums.servethehome.com/index.php?threads/finally-overclocking-epyc-rome-es.28111/page-43#post-373055