Search results

Did you managed to solve this?

Is there anyone here experienced in the flashing of ruckus access points? I have a rather unusual R350 which is running a variant of OpenWrt that I wish to wipe and reinstall unleashed on but haven’t had much luck. I’ve no idea where this access point acquired this firmware as it’s a used unit...

The flashing part is easy enough, whether it will work correctly or not is another story. As said above the difficulty will be masking the pins securely and robustly so they continue to work. Personally in this situation if you need more than 4c/4t then sell your current unit and buy a 720/920...

Hi thanks for the advice, I did try that but in all honesty couldnt get my head around the tool to insert the bios into the relevant section (my attemps failed in other words) so i ended up just using a premade bios the original thread poster created. I sold my M700s and "upgraded" to M710q...

Did anyone else have an issue with the Lenovo m700 tiny after being “coffee modded” whereby when using a coffee lake cpu (8100T in my case ) you can’t reboot the machine? It just shuts down when you either trigger reboot in the os and you have to physically unplug the power and wait 5 seconds...

Took the devices to work today with me and put an i3 8100 (non T in) and the both work! bizarre

As a further note I’ve followed the various guides on my two m700s and I whilst I can get them to support Kaby lake cpus I cannot get them to post/ show a display with an 8100T. I’ve got clean copies of all the bios via ch41a programmer thankfully. I’ve also got an m910q which I’ve created my...

What did you guys do get coffee lake working on an m700? I’ve got skylake chips working on then but it won’t accept an 8100T