Search results

Well, it has been over a week and no reboot has occurred. So, either replacing Power Supply #1 or connecting the power directly to a wall outlet versus the UPS solved my problem. I may try to connect the switch back to the UPS to see if the Power Supply was the issue.

I have a couple of spare ICX6610 switches. What would be involved in taking the image/configuration from the original switch and transferring it another switch so that I can be up and running in case the original switch fails to restart?

The reboot happened again this morning. So, I replaced Power Supply #1 and connected the power cord for Power Supply #1 and #2 directly to a wall outlet bypassing the UPSs. Will see if that solves my problem.

I have running my ICX 6610-48 for about 6 years now. The switch has 2 power supply units. Today, the switch rebooted itself twice randomly. So, I turned the switch off and blew the dust out of it and replaced one of the power supply units (power supply #2). After replacing the power supply and...

Any other suggestions?

I was hoping I did not have to go through the steps of re-applying the license. In fact I thought this unit came loaded with a license already. Here is the results of the show license command:

Ok. I have done a dumb thing on my ICX6610. I changed the speed on one of my 10g ports (1/3/1) to 1g. When I try to set the port back to 10g, I'm getting the message: PoD: No license present for port 1/3/1 What should I do? I don't want to impact all of the other 10g ports. FYI. The show...

What are you folks going to use these units for?

Let us know what you find out.

Any other use case for this unit? Please advise.

Thank you. Care to share some photos.

Thanks for the feedback.

Thanks. What are people using these units for after installing Linux or Windows OS on these units.

Can someone provide more detail on what to do with these units? I have 5 of these units that I purchased off of Ebay at a cheap price.

Thanks. Was able to get the touchscreen working.

How are you getting the Crestron TS1051 touch screen to work with this unit? I have the touchscreen plugged into the touchscreen input on the back of the unit and booted the unit and no display. What I'm doing wrong?

Anyone wants to share more information about this device?

Anyone?

Anyone wants to share more information about this device?

Please share.