Search results

thank you very much @skynet137 and @pigr8 I changed everything to default in the BIOS and in proxmox changed governor in crontab to “ondemand” mode (default mode) then I also enabled PL1 and PL2 as mentioned above and everything started to work as normal. CPU temps & NVME temps have...

After resetting everything, following is the output i see in proxmox shell...what do you see when issuing the following command. I only posted 2 CPU output, but output is exact same for all 4 CPUs. cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and...

That is what I am thinking of doing. I was following that blog for more power saving/ cooler temp settings. 1- Do you have BIOS with advance settings unlocked? or stock BIOS that comes default with the device? 2- what is the power usage at idel on stock settings? 3 - what is your CPU tems on...

if someone can share their BIOS settings from tabs bellow, on working N100 box with proxmox and OPNsense (VM) that will be really helpful. Thanks. 1: ADV > CPU Configuration 2: ADV > Power & Performance > CPU - power management control

in proxmox shell: stress-ng --cpu 4 --timeout 90s watch -n0.05 "cat /proc/cpuinfo | grep MHz" so I am putting load on all CPUs and all 4 shows 799-800MHz.

I have N100 with @tdatta 1.5Edited.bin Project Version BK-1264NP Ver 1.5 Build Date 09/28/2023 17:23:35 Version 2.22.1287 My CPU is still caped at 800MHz, I dont know what settings in BIOS i need to play around with to get CPU frequency fully unlocked. can anyone please share their BIOS...

So my CPU is still caped at 800MHz, I dont know what settings in BIOS i need to play around with to get CPU frequency fully unlocked. can anyone please share their BIOS settings or point me to the right direction. I followed this guide for BIOS settings and power tuning. TOPTON...

it is literally just sitting on my work bench with no fan.

After running for an hr with power meter, here are my box stats with running proxmox so far. CPU all cores idling around 29-30C NVME 30-32C power usage 5W only.

luckily i have a smart plug with power meter, I will try that and report back.

How do I check power consumption, where exactly? No I did not clear CMOS.

I suggest, after flashing, install HDD with OS on it and try booting the device. That is when I saw the changes take place. This is the process I did. - removed NVME (Proxmox already installed and operational) from the box - did all the steps above and first flashed this BIOS file (renamed it...

I have the exact same board and FW as yours Project Version BK-1264NP Ver 1.5 Board PCB ver 1.4 Build Date 09/28/2023 17:23:35 Version 2.22.1287

so I flashed that BIOS.ROM from Thys post renamed to CW-N100-V2-5M2-230927.bin flashed successfully, but I do not see any additional/advance settings still. is @tdatta 1.5Edited.bin same as the BIOS.ROM from @thys post? I guess not, have you tried 1.5 edited so see if you get new options...

Thank you for providing these steps. However, I am a bit confused, because the flash-tool file (CW-AL-4L-V2.0(先锋四网N100-N200-I3-N305-V2支持5个M.2版本)2023.09.27.iso) is 21.30MB, whereas bios15_edited.bin is only 10.24MB, there is a big size difference. Is it safe to flash?

please let me know, how did you do this process. bios file is in .bin and rufus is looking for ISO. thanks.

I just received my box PCB ver1.4 with v1.5 BIOS. I do not see any Advanced > Power & Performance options, or some other options. DO I have to flash 1.5 Edited BIOS to get additional settings in BOIS? Under processor information "speed" is only showing 800MHz. Also have some additional...

first time posting, long time lurking. After following this thread for year now, I ended up purchasing the N100 device from WooYi Store below. Device is on its way and I am just getting ready for the setup. I purchase this device with no NVME or RAM. WooYi Store - N100 Just looking for some...