Search results

Noticed version 5 of the bios available. Not sure if it was the one similar to what was mentioned earlier in the thread.

I am running Ubuntu and the VM was using LXC if I remember correctly. I will have to look at see if I can tell Plex to use the integrated gpu. TY for the tip.

Good afternoon all. Dumb question. Is the X13SAE-F board a valid option to consolidate servers? I may not have asked the question properly but I have the X13SAE-F that is doing nothing other than serving up my storage using ZFS and running plex for our family. I have two docker containers...

Thanks for the detailed information. And yes, I believe the i9-13900K is a raptor lake. I'll jump back to post #907 and read it. Thank you again.

Sounds like maybe it will be out in the next release for those of us using the X13SAE-F boards. Dumb question as I'm still running the original BIOS that came with the motherboard (2.0 I think). But can that be updated using the default IPMI interface non license or do we upgrade via USB? Not...

I also forgot to say thank you all for the replies. I appreciate it. Edit: Oh, and the reboot cleared the message.

Thanks. Will do. Yeah, it is. It is just my home NAS server, Plex, and that is really about it. I should probably find something more energy efficient at some point. This may sound stupid but I thought I needed the IPMI or BMC license to update the Bios which is why I never have done it...

Necroing an old thread but is anyone running this board with Ubuntu and getting this error when logging in? First time I have seen this. Pending processor microcode upgrade! Diagnostics: The currently running processor microcode revision is 0x012c which is not the expected microcode...

I have a similar experience with no failures although I am not pushing mine as you are. Mine is used for storage and Plex. I used to see some heavy CPU utilization when a family member had to transcode but that went away once I added in the Nvidia Quadro P400. Much more efficient transcoding...

Small update. Was able to get the sensor thresholds updated with the ipmitool via cmd line. I've not used it before so took a bit of reading to understand how it works and how BMC saves the data. Thank you again everyone for the tips and suggestions.

Don't be and thank you for offering the suggestion. The supermicro very well could allow it but maybe on the paid version. I'm really ignorant of the tool so have no idea what can, or cannot, be done. So always open to learning new things :D

Your Web Ui looks different than mine. It could be that I do not have a license (if one is needed).

Thank you. The server isn't really much to be honest other than managing our disk storage for Plex media and a few local PC backups. So home use, nothing fancy. Taking Daniel15 and yours suggestion I went to Noctua's site, got the fans low setting and was going to subtract 20% from it to set...

Ok, so it is user error on my part. Thank you. I'll go check how to set that. Appreciate the help.

Good morning. Is anyone using the Noctua NH-D12L, Low-Height Dual-Tower CPU Cooler with the 13th Gen Intel(R) Core(TM) i9-13900K on the X13SAE-F? If so are you seeing the fan IPMI-2002 lower critical errors (example below)? I'm wondering if there is a low, medium, or high value I should be...

Good point. Checked just now in case I forgot. I'll download it again and use a different USB stick in case something failed and I missed it. The install did revert it and running 2.0 so nothing major. stargate:~$ sudo dmidecode -s baseboard-product-name X13SAE-F

Anyone here with the Supermicro board update to the latest 2.0a bios? I tried today and received an error. Need to look into it a bit further as I've not seen this error before.

If it helps any below is my output on my Ubuntu 20.04 distro: dmidecode -t memory # dmidecode 3.3 Getting SMBIOS data from sysfs. SMBIOS 3.5.0 present. Handle 0x0020, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory...

Wonder if it is worth updating the bios. I've not noticed anything but then again maybe I'm not really pushing it much. Mine is only serving up data and Plex. Edit: thank you btw for getting the information on what it is, and the memory, and sharing.

I did not. I will take a look. Thanks!