Search results

Are you passing through the interfaces or using vmbr with multiqueues? Turbo boost? Hope you’re not using PPPoE like my ISP..

Unfortunately I can not disable it. I use it as main router for my 10G PPPoE line and I’m unable to reach maximum throughput with turbo boost off. I’m using Mikrotik CHR as VM, in Proxmox.

Anyone testing different values for Turbo Ratio Limits on V1.27 BIOS? I'm considering to decrease the values to improve the thermal efficiency while keeping Turbo Boost enabled. That would be really interesting.

Hey there! I ditched opnSense for Mikrotik CHR. Too many headaches on higher throghput and increased CPU load for nothing. I moved to Mikrotik CHR, everything has been flawlessly since then: root@deb1:~# speedtest Speedtest by Ookla Server: TIM SpA ISP: TIM Idle Latency...

Anyone tested the newer N150/N355 firewall versions? Everything seems identical besides the upgraded CPU. Some model are available from Aliexpress KingNovy and TopTon stores.

I have the same setup as yours and facing the same issues since 2 months! I had to buy a smart plug to remotely reboot the host. Last crash happened this morning on PVE 8.2.4: Sep 06 05:24:52 PVE1 kernel: BUG: unable to handle page fault for address: 00006c8bfbb76498 Sep 06 05:24:52 PVE1...

Anyone using MS-01 with a GPU? If yes, which card?

Working as expected following vGPU (SR-IOV) with Intel 12th Gen iGPU [Updated Nov 2023] Just ensure to have sysfsutils installed on the host.

Anyway able to perform iGPU passthrough on Proxmox?

Yes, it's Grafana. I'm exporting data from PVE using Telegraf to InfluxDB.

After 3 hours, the temperature is stable at 46.5C with same load and environment. It’s still a >10°C improvement for sure.

At least -15°C from the stock paste so far. I had 55-60 with very low usage, now 40-45. I’ll monitor it during the weekend.

Just replaced the thermal paste on my MS-01. I'll monitor during the next days but first data seems great! Core package is stable at 40°C with the same load/environment as before. Green is CPU package, yellow is NVME (990 Pro), red is ambient temperature. I used ARCTIC MX-6.

Is it possible to disable the power LED and the NIC lights?

Great content! Are you using VyOS on bare metal for specific reasons rather than as guest VM? Do you use some DNS container as well or just DNS forwarder? Thank you!

Great! How did you load the module?

I would replace it immediately since you bough the unit on Amazon.

It should be possible, Windows hosts are able to do it as confirmed here: https://forums.servethehome.com/index.php?threads/minisforum-ms-01-review-the-10gbe-with-pcie-slot-mini-pc.42827/post-409174

It's not public yet, any changelog available besides the CVE fix?

Anyone is able to retrieve and control the fan values from Debian/Proxmox host on MS-01?