Search results

Glad to see you got it working. I had the exact same thing happen to me. Been using this shelf for a few years now 24/7 and have had zero issues. I only run a single controller since the power draw is less but I have only 9 disks so far so not sure how well everything would work with a full shelf.

Not really sure what I did to get it working, but it eventually just connected up and now behaves without issue. Works great for SAS and SATA disks with only a single controller installed. Only downside is the drive LEDs do not light with a SATA drive connected. Good news for anyone who gets a...

Turns out I have a PS6110, didn't even notice haha. Managed to get serial to work by using a pinout from the attached image. Interesting enough my enclosure initially reported as: >CaseOfKingCans.Slot0.100.0 Then I uploaded the firmware for the md1200 controllers and it displayed as...

I have a PS6100 that I am trying to get to work with SC2 controllers I got for cheap. So far the enclosure powers on and the lights on the disks seem to work, but both EMMs have a solid amber light which the manual states: "Lights amber when the enclosure does not boot or is not configured...