Search results

Got the KeepLink KP-9000-9XHML-X a few days ago. Firmware looks very recent.

CWWK has some manuals in Chinese. Do you mean these? CW-ADLN-4L用户手册2024.03.14更新 en 第12代AlderLake-N先锋四网-N100-N200-I3-N305-V2旗舰款规格书 en.pdf CW-X86-P5_V2-V3用户手册2024.05.23更新 <-- this is just the updated x86-P5, all files translated with deepL

not from the us, not a lawyer, but speaking from pure logic i think only the import date is relevant (special cases like ivory should not apply here) Edit: now that i remember an ... uhm (EU) friend of mine bought a device from CWWK directly and it seemed this friend didn't pay tariffs or...

yes that looks correct. Though I would double check with a multimeter, since you have to solder the adapter anyway. Edit: The Numbers "1" and "4" are even printed on the board (but hardly visible if you don't take off the cooling unit)

Are you trying to control the fans via software? My setup is controlled by the BIOS, but there is an option to set it to software in the fan settings. And yes the Noctuas are 12V.

X86-P5 machine translated manual

Yeah the heat was the reason for the case redesign. During scrubs and intense drive activity temps would rise above 70°C without active cooling. Now the device is silent and cool, unless you hammer the CPU.

After a lot of tinkering and building a cooler 2nd case, i can present my finished x86-P5 "SCHNATTI 1.5" featuring Intel i3-N305 48Gb DDR5 RAM Crucial 4x 4tb Crucial P3 Nvme 2x SATA HPE SM863a 960 Gb 2x Noctua-NF-A8-PWM-80mm 12V fans soldered onto special Molex 1,25mm female 4pin connectors...

That is a definite no to similarity, too. The ports and layout are different. Cross flashing a BIOS is always risky and only done with almost identical hardware in order to keep close to 100% functionality. So having a different product (ports, layout, vendor) will almost certainly result in a...

Not sure which CWWK product is supposed to be similar to the Odruid h4, but no. It will have a lower power consumption though... being bricked and all.

How to flash a CWWK device just make sure you have the correct BIOS for your piece of hardware

Full English manual x86 P5 I tried the NVMe from CWWK, which has a LED. It does light up, and sometimes gets posted in BIOS, but then crashes after some time. I will test the slot again, once the redesigned case is lasered. The 26062024 BIOS might be worth a shot too, I am using 1505 atm.

that is from the x86 P5 manual (google translated)

Fair enough. Do you have any link for the amount of clock sources for eg. the N100/N305 or do they depend on the motherboard, too? Tbh I looked for both CPU and SSDs regarding that topic and found basically nothing aside from this Forum.

And how does that link apply to the current problem? Ignoring the 2 year age of the posting, they are talking about a pci-e slot to nvme splitter adapter of a platform with a N5105 and they even mention that the number and kind of the drives is important. So I assume that this issue is not about...

What? Clocks? First time i hear about SSDs having a built in clock lol. Even if that were true, then the E-key adapter should work if it is the only drive plugged in, which is not the case either. I tested that, too. And it isn't random ones. It is always the E-key adapter, never the 4 NVMe or 2...

I have a similar problem with the e key slot. Tried a different adapter and different drives, no luck. Sometimes it gets recognized in BIOS, sometimes you can boot and it shows in the OS, but after a few min. tops it just hangs and you cannot access it anymore. The sister board drives stay...

Has anyone found a working Windows 10/11 audio driver for the Cwwk x86 P5 i3-N305 development board with expansion board? Iam searching since a few days and even a hardware ID search results in less than satisfactory hits. EDIT: Found the driver with a janky solution. I installed drivermax and...

do you mind sharing your steps on how you got to that point regarding your iGPU split? Do you have working hdmi output on the win 10 vm too? I have the same board with 4 4tb nvme's as a zfs raid z1 pool. Edit: i checked my bios and it says 11/10/2023. It works with 4 identical Nvme. I guess...