Search results

others did report problems with some ram venders, search the older posts, I use a 32G Crucial stick, no problem

how long did you wait? first post took ages for me also. Also side not for coolers, I upgraded my stock intel to a ID-Cooling SE-802-SD V3, fits perfectly, I suspect any cooler with this mount sistem will clear capacitors just fine

what PSU do you have ?

Did they change the design with the n150/355 ? on the n305 the intel stock cooler fits perfectly and touches no capacitors, there is a picture some pages back.

purple board has ASM1166

purple one

oh, missed that part, better check in bios for the fan controls.

cpu fan and 1 sysfan is controllable ( in bios or software ), second sysfan is 100% all the time and not controllable, there is discussion already in this topic about them

yah. n100-355 does definitely not support ecc

what does the quote message has to do with anything ? Anyway, only the pro 8845hs has ECC, cwwk does not have it.

No package C-State are reported. Measurement at the wall is 20-23W with 3 active HDD's+2 SSD BUT the PSU is a 500W gold power supply, i doubt it's able to achieve lower power draw ( peak is 35W or so). S-tui report package power at "idle" around 2W and 10.9W in stress. System is never fully idle...

This is my output on debian. ‍On the purple N305.

So they dropped the x4 slot to a x1 and put another sata chip for a 2x4 a 10G nic and a 10G usb, also the wifi is under the nvme ? "interesting"

Keep in mind that topton is a reseller, CWWK is a OEM, you may get "some" form of support from a OEM regarding bugs, from resellers, probably not so much. Are you saying this one is overkill?: CWWK AMD-7735HS/7840HS/8845HS/7940HS 8-bay/9-bay NAS/USB4/40G rate 8K display 4 network 2.5G/9...

isn't there other dongle you can use ?

i have the n305 CW-NAS-ADLN-K, with open media vault. never had stability issues, solid for weeks. i'm not sure to what board are you referring with " CW-ADLN-NASV11 ", is one from topton? link ?

https://www.toptonpc.com/contact-us/#

Green PCB? so it's not the one from cwwk, that's too bad, probably the one from topton, can't speak about them, send them a email with the problem and ask for bios update, no idea how there suport is.

You have latest bios ? My boot takes 10 seconds max.

was discussed before, read older posts, 2 of the fan headers have PWM ( shows as fan2 and fan3), 3-rd one is 100% only, see if you are plugged in properly. You can also control the fans in software if you install the proper drivers, my case fans are HDD temp dependents.