Search results

i got such gps clocks today and they seem to be rebooting / shutting down if left alone. any idea if there is something like watchdog for missing antenna or whatever else?

you can't have it on ms01

you can't have rdimms in ms01. i think that's a typo. i have been using t1000 8gb in one of ms01 for a while with rhel9 at first and later with proxmox passed to a rhel9 vm. i am not so sure there is anything special about that card in ms01. been using it for transcoding and it worked well. i...

商品详情 what resistors do i need to move on p330tiny/m920x to use this bifurcation adapter? that would have Supermicro AOC-STGN-i2S and two nvme drives

skip 10gbe (copper!) altogether. it is hot and power hungry. well... compared to sfp+ counterparts. also fan on that cards would be against non-perforated casing so you might get weird noise or stuck fan. you can drill holes though

sudo modprobe nct6775

thank you, nvram update worked (pretty fast!) through efi shell :) any idea about bootutil? it detects x710 adapters as 40gbe adapters and i226 adapters as 1gbe

Any idea about x710 nvram / bootrom updates? Bootutil detects it as 40g adapter and says no updates possible while nvram update tool tries to update, then fails after 30 minutes and nothing happens beside going to recovery mode on reboot 'due to multiple firmware restarts' (adapter still works)

kinda late but i will still answer for historical reasons. 1. yes, you can disable e-cores 2. yes, m2 cooler is a part of standard configuration 3. yes, with p3 ultra it second x4 slot seem to be 4.0 instead of 3.0 though 4. 185mm is absolute maximum from pcie bracket and till front mesh/metal...

there is no separate thread about p3 ultra so i will ask here. kinda evolution of 'tiny' platform to me. https://psref.lenovo.com/syspool/Sys/PDF/ThinkStation/ThinkStation_P3_Ultra/ThinkStation_P3_Ultra_Spec.pdf i have this platform and it says >Slot 2: PCIe® 3.0 x8 (x4 lanes), low profile...

any idea if p3 ultra and p360 ultra have bifurcation support for 'upper' pcie 3.0 x8 slot? not sure where else to ask :)

maybe they will work with 12v?

> This seems to be the best price I'm able to find in EU for refurb machines. most likely no one 'refurbishes' them. try looking for used one. > I can get a lower-specced machine (256GB SSD, 8GB RAM) for 329 euros and then a 64GB kit, wonder if it's worth though considering it comes with the...

5 to 600 euros? for 5 euros for sure. 200 bucks naked machine too. i wouldn't pay 500 euros for i7 8700 + 32gb ram. i9 9900t es costs 130$~ from china or other sellers and is much better choice 512gb ssd is cheap and it is an old used ssd. you can pick 4tb for 160-200$~ depending on sale. 32gb...

up to i9 9900 is supported. 65w psu works fine with 9900t variant and no need use different heatsink

can i power lenovo tiny5 by 24v power supply? i am pretty sure that 65w stock psu is more than enough since i did run it at 65w before switching to 135w. i did need atleast some option that has a correct prongs so it has a ground connection (to connect to PDU) and nothing but 135w was available...

that x710 should fit (with front metal piece removed). check previous posts. people did fit x710 in m720q and other variants of tiny5 machines. i can recommend getting 10gtek transceivers in general. good support, good products, been using their products for years. in case of 5gbit - you have to...

> This is a very good suggestion. I was just stuck on trying to get my x710-t2l to fit into something since it was expensive, but it may be easier to flip it and go your route. regular x710-t2l should fit with front metal support removed on m720q/m920q/m920x/p330tiny (just a screw). which...

do you need copper or fiber? with 10gb your best option is something like x520-da2 (best ever made 10g cards). there is 4 port version that literally has double everything onboard but that is just hotrod in that tiny lenovo 1L machines. so let's say you take something like x520-da2 in...

how much space do we have for m2 heatsink to be mounted on m2 drives like hynix pc801 on back of m920q/m920x/p330tiny ? '0.5mm' heatsink + '0.5mm' thermal pad maybe? trying to make everything run even tiny bit cooler since 10gbe adapters heat up uncontrollably. does not cause issues running 24/7...