Search results

Now, I just ended my 2nd round and reached this page again. :):) I've already done almost all the configuration, but I still struggle on the opnsense side. I've seen that some people talk about FW rules, that I assume are to place on the TRANSIT vlan. We talked about this last time. But other...

Fixed. It was a bad cable/patch panel port. Now I've been able to remove that remaining ve 2. If I was been able to get to the switch via the old Vlan 2, there should had been some kind of network loop. I have STP disabled, so who knows what was happening. I also configured a SFP+ link, in...

Thank you fohdeesha for your help. I also take this opportunity to sincerely thank you for the work you've done on this thread, both initially and in keeping you active on it. You where right, there wasn't any rule on the transit interface. I added the following: Should then the router at...

I've started configuring the 6610 for Inter-vlan routing. At the moment it doesn't have anything connected to it, and initially it had all my current VLAN setup. Was connected to the old switch at port 1/1/2, all old vlans tagged. Now I have configured a new set of VLANS and progressively...

Wow! All those QSFP... :eek: I've been changing the 6450 configuration. With the serial cable I managed to get the management interface arranged as I wanted. But I found something interesting in my PC. It doesn't let me input the gateway for the ethernet interface. And there's a suspicious...

First, thank you Kapone for your help. This is something clearly escapes to my limited network knowledge. I've been some days struggling already, and since I still haven't found a solution. Fair enough. There has been so many years since I had to work with a Windows domain controller. I think...

Thanks Kapone. What a coincidence, I also own a Tesla. I suppose you realized that most of the telemetry filtered by adguard is the communication between the Tesla and their Api mainly to serve the phone app. I had to whitelist a server to bring back the car status while at home. Perhaps that...

While I study migrating to L3 at the 6610, I received a 6450 that I want to be my office switch. Currently, in the basement homelab, I have a Tplink running L2 only with some Vlans defined. Opnsense machine that does the routing (10.1.2.251 @Trusted VLAN 2) and the ISP link is directly connected...

Thank you Kapone for pointing me in the right direction. I've been studying the method you posted so I'm completely sure that I understand it before doing or replying anything about it. I plan on applying your "TRANSIT" configuration. I'll bring the 6610 to my desk and raise an opnsense device...

Are you kidding, aren't you? :oops: I'm still at page 390. In what I've read, I've seen that a similar case has already appeared. But it wasn't clear to me. I plan on continuing reading until this present page this evening. Please, also take into account that not being a native english speaker...

Hello! After finding this great article, some months ago I bought a ICX6610 for replacing a tp-link in my homelab. I've been reading all the resources in this thread and getting used to the interface. So far I've configured my vlans, linked to the old switch and been testing it with two cameras...