Search results

I discussed with my wife, and she was like "Please, just do it. How many hours have you put into this thing?" XD

OK, been trying repeatedly throughout the day 1. Run the All Ethernet Tests 2. Escape out to the Monitor prompt 3. Set the address to 192.168.1.50/24 4. Ping the Raspberry Pi on 192.168.1.49 This results in a Request timed out From the Emergency Workaround Is there anything else to try, or...

I've been doing a bit of experimentation today. For the tftp server, I have it running on the native port of a raspberry pi, so that I can see if the lights come on. I verified that this isn't a problem with the Raspberry Pi, by unplugging the RJ45 from MGMT 1, and plugging it into my MacBook...

OK, maybe I misread Note 1 on the Management Port page. I thought that was saying, you can use the emergency workaround up until you cold boot the switch, at which point, it's no bueno. When you say unplug / replug, are you talking about cold booting the switch, or reseating the network...

I'm flashing my LB6M following Brokeaids, everything made it through smoothly to Booting Brocade. When I ran boot system flash primary I got an error `Bad image header Since I was past the danger zone, and though I already rebooted once earlier in this section, I thought it was safe to...