Search results
-
S
HP DL380 Gen 9 drive sled lights issues
Normal PCIe connectors on the main boards have a maximum performance of 25W. But the LSI 9300-16i controller requires 26.9W. Some newer motherboards may have a higher performance. Don't know what's the status with the DL380. I have found that cables such as these für HP ProLiant DL380...- series80
- Post #16
- Forum: RAID Controllers and Host Bus Adapters
-
S
HP DL380 Gen 9 drive sled lights issues
The caddies have all kinds of lights that work with the HP controller. With the LSI 9300-16i I have and with cables that have the sideband signaling cables (I believe most do, but you can check with a continuity meter to confirm) the disc **access** lights work. As I mentioned before, you need...- series80
- Post #14
- Forum: RAID Controllers and Host Bus Adapters
-
S
HP DL380 Gen 9 drive sled lights issues
Yes all my drives are non HP (WD Red SA500 SSD, Seagate IronWolf PRO and Seagate Enterprise NAS HDD) . Cheers Vassilis- series80
- Post #12
- Forum: RAID Controllers and Host Bus Adapters
-
S
HP DL380 Gen 9 drive sled lights issues
I have an HP 380DL Gen9 with a generic LSI 9300-16i controller connected to the 380DL drive backplane with two 10Gtek HD miniSAS (SFF-8643) to miniSAS (SFF-8087) 0.8-Meter cables. These cables cost 20 EUR for the pair (on Amazon.de). I had the same problem with drive LEDs staying dark during...- series80
- Post #10
- Forum: RAID Controllers and Host Bus Adapters