Search results

  1. T

    CWWK 2x10G SFP+, 2x 2.5G N100/i3 N305

    Seems like CWWK has a new (?) 2x10G SFP+, 2x 2.5G N100/i3 N305 router box that looks interesting if you need a small 10G SFP+ router. Has anyone gotten their hand on a sample yet? Would the 9 PCIe gen 3.0 lanes be enough for that I/O?
  2. T

    CWWK/Topton/... Nxxx quad NIC router

    What 4-pin fan connector does the motherboard use? I'd like to use my own fan but suspect I need to add a new connector to it.
  3. T

    CWWK/Topton/... Nxxx quad NIC router

    I have the n305 and running out with 5 nvmes works fine for me.
  4. T

    CWWK/Topton/... Nxxx quad NIC router

    I'm using this BIOS, which CWWK sent me a link to an AliExpress chat: CW-N100-5M2-230428.iso
  5. T

    CWWK/Topton/... Nxxx quad NIC router

    No tweaks. Just the 4 nvme bios from cwwk. I did repaste my CPU. Are you CPU temps ok? My room is probably 20C. My drives are intentionally not the fastest kind, given the lack of PCIe lanes. Perhaps you have more modern drives, which tend to run hotter?
  6. T

    CWWK/Topton/... Nxxx quad NIC router

    I get a max of 52C with 5x Crucial P3.
  7. T

    CWWK/Topton/... Nxxx quad NIC router

    Cruical P3 2TB
  8. T

    CWWK/Topton/... Nxxx quad NIC router

    Yes, the cwwk n305 V2 with larger fins, repasted. No fans. Idle in proxmox with 2 idle vms.
  9. T

    CWWK/Topton/... Nxxx quad NIC router

    I am running 5 NVMe drives: # sensors coretemp-isa-0000 Adapter: ISA adapter Package id 0: +41.0°C (high = +105.0°C, crit = +105.0°C) Core 0: +37.0°C (high = +105.0°C, crit = +105.0°C) Core 1: +37.0°C (high = +105.0°C, crit = +105.0°C) Core 2: +37.0°C (high = +105.0°C...
  10. T

    CWWK/Topton/... Nxxx quad NIC router

    Got the CWWK N305 unit with the 4x NVMe expander board. Happy with it so far. runs relatively cool after repasting (40C lightly loaded). I tried to follow the optimized BIOS options posted way back in this thread but the BIOS menus for the 4x NVMe BIOS looks a bit different. My PassMark scores...
  11. T

    CWWK/Topton/... Nxxx quad NIC router

    How do you run PassMark? Is there a debian package I can install?
  12. T

    CWWK/Topton/... Nxxx quad NIC router

    Why not? It's cheap. ZFS loves RAM.
  13. T

    CWWK/Topton/... Nxxx quad NIC router

    They sent me the following video: 【第二期】畅网N100先锋版迷你主机一转四转接板使用教程_哔哩哔哩_bilibili
  14. T

    CWWK/Topton/... Nxxx quad NIC router

    The vendor has provided a bios you need to install to use the 4x nvme splitter but the instructions are in Chinese. Shall I understand your answer as you don't know how to update the bios?
  15. T

    CWWK/Topton/... Nxxx quad NIC router

    Anyone have the bios update instructions?
  16. T

    How come the i3-N305 can be run with 32GB of RAM when Intel's spec sheet says max 16GB?

    Are there no limitations in how much memory the CPU can address?
  17. T

    How come the i3-N305 can be run with 32GB of RAM when Intel's spec sheet says max 16GB?

    Intel spec sheets says the i3-N305 supports 16GB of RAM: Intel® Core™ i3-N305 Processor (6M Cache, up to 3.80 GHz) - Product Specifications | Intel Yet I see lots of people using 32GB sticks and report that it "works" e.g. in...
  18. T

    CWWK N305 4x2.5GBit - 4x M.2 Expansion Board - How to enable PCIe bifurcation?

    Did you find a solution? I'm looking at buying the same board. I thought the motherboard only supported one NVMe and that slot is used for the expansion card for a total number of 4 drives. Are you saying there are room for 5? Are there two NVMe slots on the board? I'm surprised there's enough...
  19. T

    R86s Router

    Any performance optimization tips for this unit, running OPNSense on Proxmox? I have already passed through both 10G Mellanox NICs and 2 out of 3 2.5G NICs as described in https://www.servethehome.com/how-to-pass-through-pcie-nics-with-proxmox-ve-on-intel-and-amd/. Running iperf3 I get 2.01...
  20. T

    R86s Router

    Got a reply from David at GoWin: "we will add the “Restore on AC/Power Loss” to it,and also we are think about Battery/UPS solution for this item". So I guess no automatic restart on AC/Power Loss right now but perhaps in the future.