Search results

Thanx for the immediate reply. I will try to see what I can find! :)

Are the 7313s still available? I am going to do a small look around to figure out the cost of buying the rest of the components to build a system if they are available (I guess that you do not have any server or at least mobo for those processors according to what you wrote... right?)

Does anyone have spare 3.5 inch drive carriers for Dell R520/R530 servers? Dell does not sell them as parts anymore, you have to buy them with an HDD, but then it charges an arm and a leg for the combo. We have some spare HDDs from machines that have died and I want to add them to my university...

I am looking this FPGA card and I am drooling....:eek: It is way out of money league at the moment, but out of curiosity, where did you have this monster installed? Or it is standalone? By the way, you didn't post any photos of the card/setup

Can I simply get the FREE threaripper? :) I cannot understand whether you are selling the full system or you are selling it component-by-component. The prices listed per item are quite a bit off... I can buy from european resellers a lot of the items significantly cheaper but... new. Maybe you...

Thank you for your search! Most appreciated!

ok I understand, thank you very much! Kinda disappointing though...

Hi all, I am trying to build a custom workstation for mostly hardware (ASIC/FPGA) design and deployment testing. My requirements are therefore min. 256GB RAM, at least 24 cores (as fast as possible because certain parts of the flow tend to favor single thread performance), ability to have two...

Ok, drives tested. Tools report them completely new as specified in the listing and healthy 100%.

I am adding a watch on this thread. Most interested on Xilinx boards.

Are you really also going to add FPGA boards?

I just received two drives from iridial. Excellent communication and very fast delivery. The drives were very carefully packed and the overall package was much better than any drive that I have ever ordered from a commercial shop. I still need to install the drives and test them, but overall...

Hi! Thanx for all the clarifications! I just saw your other sell threads. I will check your PM right away!

Hi, may I ask some more details about the drives? Have they been acquired some time ago? Are they covered by an international warranty? (btw where are you located? What would be the expected cost to send them to Greece?) Do you have an ebay account or anything to check your reliability?

Thank you all guys!! This forum is amazing!

This was fast! Thank you! So you are saying that a solution like this: Alveo Card QSFP28 -> https://www.fs.com/de-en/products/116272.html?attribute=10175&id=2293723 -> 10G BASE-T RJ45 SFP+ Module -> cat6a cable -> our RJ45 based switch, should work?

Hi all, I am developing a hardware design on an Alveo U55C card (Alveo U55C High Performance Compute Card) and need some basic network functions. However, I can only use the QSFP28 interfaces that the board provides, yet all lab equipment that I can connect it to is copper RJ45. An initial...

Hmm, I see. Thank you for the clarification. This is something specific to the architecture of the Mellanox ConnectX chips or it is something that generally applies to all solutions for 10Gbps networking (even chipsets geared towards workstations such as Aquantia ones)? My application scenario...

Wow, I completely lost you here. Why would I only get 2500 Mbps from a 10Gbps NIC? Also Connectx-3 cards seem to be passively cooled and in the manual I could find: https://network.nvidia.com/pdf/user_manuals/ConnectX-3_Ethernet_Single_and_Dual_SFP+_Port_Adapter_Card_User_Manual.pdf it does...

Thank you both for the prompt answers! I will look into your proposed cards and see what deals I can find. The argument about the power draw and heat dissipation is a very important one that I will have to take under consideration. Considering the cost, I was under the impression that SFP...