Search results

Are you using the same gpu holder and the same vapour chamber heatsink? or you did also replace it? I wonder if other video card coolers are compatible.

Sorry, I took the Aliexpress description when writing. I need to sleep more lol. Here is what I mean. normal heads are like rounded from the top. The one I need is flat with undercut (aka "reverse" in engrish?) btw, the screws on the gpu vapour chamber V620 are HOLLOW in this one I'm trying...

Somehow saved my V620 by removing that darn stuck screw. Anyone can confirm if the screws are M2/5mm phillips reverse flat head?

Hey folks question, I bought a second AMD V620 but I noticed this runs CONSIDERABLY hotter ( I bought it from somewhere else). I assume I need to re-paste. Is there any thread or guide to re-paste the V620? I'm more worried about the memory pads for sure. Update.. I opened it up, re-pasted...

Yeah I used similar flags but then I used Ubuntu and Proxmox. Most likely the cause? I mean as in how long has been since you tested your video card, of course "testing" as in performing specifically testing is irrelevant. I mean Testing as in owning the device and using it under various...

Kinda strange, all the OSes I tried immediately picked up the V620, specially after installing the AMD drivers and ROCM. All sensors came up too. How long had you tested?

I'm using it for llama.cpp and comfyui mostly. What tests are you looking for?

Not a shroud, ended suing an snail blower style (laptop version, sawed off) and 3d printed the adapter myself.. And it is loud on anything above 60% fan speed. But temps stay lower than 60C at 100% comfyui style use with 80% vram usage with a 25C ambient temp.

ATA device, with non-removable media Model Number: CT4000BX500SSD1 Serial Number: 2505E9A443B3 Firmware Revision: M6CR082 Media Serial Num: Media Manufacturer: Transport: Serial, ATA8-AST, SATA...

Hi Folks! I am a bit confused on what I'm getting here. #1 I bought this card a long time ago and It was sold as "HBA IT" on ebay. So far no issues.. But then I had some difficulties about TRIM (aka I added a SSD to an SSD pool in UNRAID) I get this result and clankers are telling me this is...

dang, would have loved to get the 3d STL file and print it myself now that I have a 3d printer.

Were you able to make that modified case? Id love to take it to a spin now that I have a 3d printer.

I ended buying a 3d printer and print it myself after so many hilarious issues. The bought piece from Aliexpress came defective for example.. and printing locally was a fortune. Thanks everyone! Now I wonder if there is a way to restore the 4 pin fan header to control the fan properly.

Pretty sure the MI50 shroud is incompatible. The snail style rear fan might be. I mean the size is the same but the difference is the screws I believe. I assume it might be usable if you use a wider hole on the horizontal space. Anyway I did bit the bullet and I ended buying one from AliExpress...

Jesus, finally got a response from one of the local 3d printing companies.. They want an insane 100 CAD for a full shroud with no adjusts and 60 CAD for the snail fan style lol.

Im checking one of them, but so far all of them are 30+ USD + 20 or more on shipping. So far I noticed 4 options: Full shroud replacement for large fan. Small shroud replacement with a blower fan. <-- only seen compatible with MI50 a blower fan at the end using an adapter (snail style) and...

Did, now to wait for the answer :) In the other hand, as for new thread: https://forums.servethehome.com/index.php?threads/amd-v620-shroud-fans-options.54660/

To resume: Bought a V620, looking for cooling solutions. Details: I'm on Vancouver, BC, Canada. As per my row of comments here: https://forums.servethehome.com/index.php?threads/amd-radeon-pro-v620-32gb-gddr6-gpus-565.47945 Been trying to find a proper fan/blower for it. Most people seem to...

I am unsure which part was rude to you. I literally was trying to explain the issue in a better way by being specific. And it is kinda weird considering you just said "maybe consider that you haven´t explained your issue correctly". Is my point of asking if the MI50 rear section has the same...

It seems that nobody is really reading along the lines of what I wrote. The question was about COMPATIBILITY. Not if there is availability or not. I know there is availability. Nor about 3d printing your own stuff or design your own stuff ( If i had a printer I would have done so already or...