Search results

@Chas Upgrade RTL8127 driver to lastest one. or upgrade kernel to Linux6.18

Upgrade to lastest V1.27 BIOS IN BIOS menu find “Turbo frequency adjustment” make your big core and small cores max Lower the frequency of your big cores and little cores. Maybe CPU design issues, it may no longer be able to stably maintain the highest turbo frequency.

PCIE TO OCULINK： MINISFORUM EOP4A OCULNK DOCKING: MINISFORUM DEG1/DEG2 Intel AMT remote access stability: 1. For System should 100% not turn off VPRO NIC(If turn off will cause vpro cannot connect) 2. Using static ip addr

Compatible with SFP+. I have already tested it.

Buy minisforum eop4a

Try disable ASPM function? Minisforum offical using Kingston,Crucial SSD.

There have two way upgrade microcode, BIOS and System. If your system already lastest enough, have microcode newer than BIOS, then will replace it. If you want more stablility. You can check there two new menu in CPU Performace setting. -0.2Ghz max Turbo Freq will more stable.

For BIOS. There is not way to dectect This GPU is inside box or outside BOX.

highly suggest do not change max turbo speed. Advanced->AMD Overclocking-> Accept->Precision Boost Overdrive CPU Boost Clock Override: Enabled(Negative) Max CPU Boost Clock Override(-): 10

Fast PPT is Turbo TDP. Slow PPT Limit is Intel's PL1;

Nope Not here. Menu item below this item.

Power Limit will be cannot change setting when PCIE GPU inserted. If you want change your powerlimit setting, you still can change it use manaul fan mode and go to CBS SMU setting.

Silent Mode.MAX CPU frequency lower than default. Most of idle or low load high temperture, cause by very high max cpu frequency.

IN HW Monitor Menu Setting to Silent model will better. And There have a manual FAN MODE in HW Monitor MENU. Enable it. MAX FAN SPEED IS 200. SET TO 200. will very loud, but very cool.

Ryzen Pro/ECC support depends on what kind of resouce can get from AMD. Most of your other "Suggestion" may conflict with current MS series's design. With this size, you have to do some compromise.

FAN PIN

J2702 is standart USB2.0 You can try to find GND and VCC5V. I remember therehave a reversed FAN CONN in the back. you can find it.

There have a FAQ in UserManual. I think there must be a mistake on spec information.

Follow the User Manaul. It's only support PCIE NVME SSD. Not support any SATA SSD

X710 chipset support upto PCIE3.0x8. But PCIE3.0x4 is already enough for 2x10Gbps SFP+ Port. PCIE3.0x8 for X710 4x10Gbps Version.