Search results

I mostly needed the bios dump to find the offsets for the values that needed to be changed.

Good question, I think that you can, however the power requirements are a lot higher and it would probably throttle much quicker than the T version. I don't have a CPU to test this though. If you're wondering about the undervolting and power limiting, I think you can probably adjust these...

TLDR: Bios unlocking and hacking to undervolt and unlock vGPU profiles For anyone else hardware hacking on the Lenovo platform, I did a few things: I have an m920q with an i9 9900T ES cpu, and 64GB of memory. I'm using this to host proxmox and a couple of windows and a debian VM. I wanted...

All gone!

I just wanted to update the price on this to 90/each

I have 13 of them total - and I'm asking 125.00 each.

They are these: NEMIX RAM 32GB (1X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V 288-PIN Non-ECC Unbuffered UDIMM Desktop PC Memory Compatible with Dell SNP732YDC/32G AB120719 Unbuffered PC Memory - Newegg.com

Sorry fixed.

Looking to sell my old modules as I upgraded to 64gb ones. These are pulled from a working system. Located in Canada. Can split into smaller orders of minimum 2 pieces. I have a total of 13 modules. $90.00 OBO These are $200.00 USD each new.

And happy to report that I can negotiate a 2.5gbe connection over an older ~100m cat5e cable.

I went with the cloud gateway fiber - UniFi Cloud Gateway Fiber - Tech Specs. Due to the two SFP+ slots, 10gbe rj45, and integration into the unifi world.

I currently have a brocade ICS 6424 POE 1Gbs switch. I am thinking that I should upgrade this at some point to 2.5gbs on the internal network. I have a number of ubiquiti APs as well as an edgerouter that do most of the heavy lifting. Internet is a SFP fiber 1gbs cable terminated on the...

Can you share details and where and how you found that?

Here is a pci riser that gives you an extra nvme slot. -- Tinyriser - a better Lenovo Tiny PC riser by FairywrenTech on Tindie

Ok I managed to score a deal on a complete setup with the camera, conference phone and base unit. On powering it all up, the phone comes up with settings, and a default password of admin/1739 to get into the phone settings. It also shows settings for the base unit as well. Now to attempt...

Trying to get some last life out of a server platform. DL380 G7 with a PCI2.0 limited interface. Looking at the Samsung PM1633 as the best option for upgrading from some spinning disks on the P410i controller. Any other options or recommendations? Not looking for all speed, but overall...

Ok - there was a post that touched on this, but I want to be a bit more specific. I have a few m920q's with the UHD630, I have enabled gvt-g to get the UHD passthrough to two VMs (windows and linux) to work, and does so very cleanly! My issue is that the resolution of the VM's is limited, I...

Cool, I just got mine as well for comparison. ❯ smartctl -a /dev/disk7 smartctl 7.4 2023-08-01 r5530 [Darwin 23.4.0 x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number...

Ok so still looking for a suggestion - I would imagine that someone else has been down a similar path. If investing 2k into the Gigabyte SP3 platform is overkill, ideas on the following?: - Rackmount formfactor (2U ideal) - Dual SP3 platform - at least 4 U.2 NVME drives - at least 4 sata drive...

@grenskul Yeah I was thinking that the 24 nvme was overkill, but 1-4 U.2 2.5" is probably the minimum. I already have a ton of DDR4, so I don't need that. Just looking for a sudo-inexpensive multi-core 2U rackmount that isn't going to break the bank. I'm upgrading from a DL360-G8 if that helps.