Search results

  1. H

    Gigabyte MC62-G40 - No Video Output

    Yes, the I/O ROM is enabled, the Link Configuration is set to Auto and the Link Speed is set to Auto. Nearly everything is set to the default values. I have only changed the numlock state and Quiet Boot.
  2. H

    Gigabyte MC62-G40 - No Video Output

    I'm feeling uncomfortable about this now. I've checked the motherboard and there are some missing components (U109, U110 and some passives) near the VGA connector. They may or may not have anything to do with it but I've given up on this port now and have assumed it's not working. I fitted an...
  3. H

    Gigabyte MC62-G40 - No Video Output

    I have verified that the monitor and cable are working so I'm left with: 1) a dead VGA port on the MC62-G40 2) something wrong with the configuration of the BMC Unfortunately, it's not clear what the function is of some of the menu items. I'll keep fiddling about for a short while before I give...
  4. H

    Gigabyte MC62-G40 - No Video Output

    Yes, I have a 15-pin VGA monitor. This input (and the cable) worked the last time I used them but I suppose they could have developed a fault.
  5. H

    Gigabyte MC62-G40 - No Video Output

    Another newbie with this board here having problems with video out from the onboard GPU. I have worked out how to talk to the AST2600 though the MLAN port and, through this, I can see the output of the GPU through the H5viewer. I have even managed to install Ubuntu using this but I can't see...
  6. H

    10Gb SFP+ RJ45 100m

    My Wiitek UF-RJ45-10G-100 has arrived and I can confirm that it seems to work fine in my Solarflare SFN7322N card. What's more, it seems to run quite cool with just a 2m cable: Identifier : 0x03 (SFP) Extended identifier : 0x04...
  7. H

    Coolest SFP+ module with 10G RJ45?

    No, no, not one with an aspiration to succeed The Fonz! My new ISP supplied an ONT (DZS HX-XGS-5302) with two RJ45 ports. The first claims to support 100M, 1G, 2.5G, 5G and 10G whilst the second is apparently limited to 100M, 1G and 2.5G. So far, I have only managed to get the second to work at...
  8. H

    10Gb SFP+ RJ45 100m

    Please excuse the intrusion into this thread. I have a number of SolarFlare NICs with SFP+ slots. These do not seem to like 10Gbase-T modules. I have managed to get a 1000Base-T module to work in some cards (see below) but never a 10Gbase-T. Any recommendations for a low-power one that...