Search results

So @MildHotSauce you never were able to update firmware, but it didn't matter and is working just fine anyway? How much did you pay for the H100? I've been looking for some, and it seems I missed all the good deals that existed from May-July :(

Do these D0 only work on first BIOS of the motherboard? Or new BIOS are also supported?

All Step6 work same? 8358 ES QWAN ?

Does QWAS work with all X12? X12DPG-OA6?

Does anyone know where to get COMe modules (minilake or compatible)? Also, anyone interested in a BSM run? I'm getting back to this project now

Unless they are free, you're supposed to post price, etc.

Sounds like it could be a short to ground..

Related, what drivers do you use to get this working on macOS?

Thanks!

Located the official Wedge400 design files (schematics + Gerbers for the BSM) here. These can be sent directly to a board house for fabrication. Does anyone want to do a production run of BSMs together? Edit: where did you find the Gerbers for the BSM? I only see PDFs of the schematic and BOM...

The included 256GB DDR4 is an impossibility right now..

Missed it, great price

What's gone wrong with them? Which APC models? The 48v?

Thanks for this, ordered both backplanes today. The extra flexibility of the EL1 does sound nice - here's hoping that it won't be too challenging to get back up and running. The rebuild I was doing was of a predictive failure disk, not a failed disk, so maybe the array will come back up with...

Not very often, and unfortunately rebooting hasn't brought it back

It affected the same disk that was being rebuilt

The array is also showing as degraded and won't come online missing this one disk. This is a bit scary, because RAID5 should still keep going even with a missing disk, none of the storcli commands can seem to bring the array back online to back up data, either. Has anyone encountered a single...

root@truenas[~]# storcli /c0/p6 set linkspeed=12 CLI Version = 007.1207.0000.0000 Sep 25, 2019 Operating system = FreeBSD 13.1-RELEASE-p7 Controller = 0 Status = Success Description = System reboot required Phy Info : ======== ----------------------------- Phy No LinkSpeed Description...

root@truenas[~]# storcli /c0/pall show CLI Version = 007.1207.0000.0000 Sep 25, 2019 Operating system = FreeBSD 13.1-RELEASE-p7 Controller = 0 Status = Success Description = None PhyInfo : ======= --------------------------------------------------------------------------------------------...

Has anyone ever had a 12G SAS backplane port (or RAID controller lane) die during a power outage? It seems like that's the case for me - I was doing an array rebuild when the power was pulled (despite UPS and redundant power, plugs were physically pulled :/), and now no matter what drive I put...