Search results

I have updated to v1.27 of the bios and my microcode still says 0x411c - is this the right version for the MS-01 i9-13900h for Proxmox install? If not what version is and how do I obtain it as it is not on the support forum. Thanks

I was wondering if you ever got this resolved? I am trying to do something similar: 1) SAS Backplane Expander 2) Backplane a. In Split Mode 12x12 3) System Board 4) Backplane Signal Connector 0 5) Backplane Signal Connector 1 6) Slot-4 PCIe HBA...

Nice I assume you did this on proxmox correct? Thanks

Yes please

Did you ever get an answer to this? Thanks

I am looking for a VPD dump from a SN2700 in order to fix the same issue I have. Does anyone have this bin file which I can possibly try to use and fix a SN2700? Thanks in advance.

These are the values that ONIE is looking for that are missing in my SN2700 eeprom right now as the T1V header check value are invalid so it is missing these configuration values: onie-syseeprom -g 0x21="MSN2700" - Product Name onie-syseeprom -g 0x22="SN2700-CS2F" - Part Number...

Did you ever get a response for this as I have a similar problem with a SN2700 switch someone gave me :)

Newbie so be nice :) I was given a old busted SN2700 and I used to to play around with stuff and get comfortable with the platform. I was able to upgrade the ONIE and put cumulus on it. But it jus refuses to read the onie-syseeprom values with the following error: Error i2c_write_2b: No such...

I order this and the first set had an issue machine would not post. I returned it and got a replacement which worked fine!

I have a chance to buy a SN2410 with ONIE 2019.02-5.2.0010-115200 and Cumulus 4.1.0-cl-7-amd64. This seems like a steal to me any issues with upgrading to Cumulus 5.12 and 2020.11-5.3.0005-115200? I assume I will not need a license key since it already has Cumulus installed on it? I am...

How do you know if it is an MS-01 rev 1 vs rev 2?

G.SKILL Ripjaws DDR5 SO-DIMM Series DDR5 RAM 96GB (2x48GB) 5600MT/s CL46-45-45-89 1.10V Unbuffered Non-ECC Notebook/Laptop Memory SODIMM (F5-5600S4645A48GX2-RS) These work for me but the CT2K64G56C46S5 module mentioned does not boot in my MS-01 13900H bios v1.26. Could it be due to...

I was planning on using cumulus do to that very fact of easier loading. extra costs: $100 for new SSDs plus backup $150 for railkit lowest one that is real on ebay is $1k which means $1250 So really anything from ebay from a reputable seller with rack mount for around $1350 would work. There...

I shall keep looking for a US based SN2700 then and hope I can get a bargain as replacing the SSDs and upgrading the OS is a pain and has to be done in stages if the OS is not anywhere near current. Also, most sellers do not post or know the version of firmware and cannot reliably test to see...

why does the sn2100 cost more than the SN2700?

CRS520-4XS-16XQ-RM - this is what I have now and it works but need more port density :) As you stated the Mellanox used is less expensive than their option of CRS520-4XS-16XQ-RM :) However, some can be had for around $1800 and all I have been able to find for Mellanox 2700 is 1-2k :(...

Good to know then i definitely want the SN2700 :) I know that Juptier, Cisco, etc maybe better switches but getting to the firmware without a license is really not feasible so they don't really fit my home lab requirement :) Any other 100g switches you are aware of that would allow me to flash...

Actually I though that the SB7700 and SB7800 could be used for Ethernet as well not just Infiniband if you flash them with the correct firmware which is why I am asking :) My network is all Ethernet I have no Infiniband.

Hard to find the SN2700 now and they are expensive. The SB7??? are cheaper but wondering if I should wait for a SN2700? Thanks