Search results

Just stumbled over this listing on woot.com clearance section: Woot Tyan 1S AMD EPYC Genoa Motherboard Here is the link to the official page: Tyan Product Page

You're correct, I was getting errors in IPMI, however, didn't realize that the error buffer ran out of storage and wasn't being updated. Here is the error logged in IPMI: |Record| |GenID|GenID | |Sensor| |EvtDir|Event|Event|Event| ID | Type | TimeStamp |(Low)|(High)|EvMRev| Type |Sensor #|...

Hello, I am running a home server with the following specs: Mobo: Asrock Rack ROMED8-2T CPU: AMD Epyc 7401p RAM: 8x Samsung M393A4K40CB2-CTD (32GB@2666MT/s) Other devices: (Nvidia 2070, SAS HBA, PCIe to 4x NVME card) I recently upgraded from Proxmox 7 to 8, and around the same time I also...

Hello, If you are still having issues, below are a few things I would check: - Set the fan header that you used for your CPU to 100% in IPMI - most server boards including ROMED8 don't like slow spinning fans like the Nocutas and freak out, you can change the fan threshold later to mitigate...

What is everyone using to cool this card? I recently received mine and printed the following 40mm fan shroud: Tesla T4/P4 to 40mm Fan adapter by klipper Using a Noctua NF-A4x20 running at full speed, the card still hits ~70C under 50% load, i have not tried going further... Thanks!

Have the short cart, they look to be two revisions of the same card. The long one is rev 1.01, short one is rev 2. This is according to the listings on ebay and what I see on my card. I think they are functionally identical. Also the short card is able to fit into cramped boards like the X10DRL-i

Hey Everyone, Has anyone tried the following mod to the iLO firmware: https://github.com/kendallgoto/ilo4_unlock It looks like a hack of the iLO firmware to enable ssh and direct manipulation of the fan profiles based on temperatures of each component in the system. This only works for iLO...

I tried doing the same rewiring job as you, attaching a standard 4-pin fan connector as a replacement for the default fan and tested a few different fan option. Fans Tested: Delta FFB0412UHN - DB6R - Default fan for EC200a Delta FFB0412SHN - 9C72 - Supermicro version Delta FFB0412SHN - TYSA...