Search results

@lawrence1986 I saw earlier in the thread you were having a similar issue with these Miktotik S+RJ10 optics. I tried changing the flow-control and setting it manually to 10G-full but that doesn't work as its only being detected as an SFP. Did you do anything else to get them to work?

Looking into the media types I can see that both my 10G optics are being detected as only 1G optics. Port 1/2/2: Type : 1GE M-SX(SFP) Port 1/2/3: Type : 1GE M-SX(SFP) They both run at 10G on my 6450 switch so what could be causing this? Does the 7250 have an extra check or something that...

Yes all licences have been applied and they are running at 10G, as shown below for my 2 fibre optics 1/2/1 Down None None None None No 1 0 cc4e.24e1.70ee 1/2/2 Up Forward Full 10G None No 1 0 cc4e.24e1.70ee 1/2/3 Down None None None None No 1...

I recently acquired an ICX 7250 as an upgrade over my ICX 6450 mainly for the extra SFP+ ports but it appears my Mikrotik SFP+ 10G Copper optics no longer work. The switch detects the optic and it does appear in the interfaces list but the link is never changed from DOWN to UP. I have...