Search results

They can act like bridge but software one. You need to setup proxmox/pfsense/opnsense/openwrt.. to bridge them together.

Ok, write to Topton then. People on forum wrote that they got bin file from Topton when they requested

Did you wait long enough after RAM replacement. This unit have huge delay after new RAM implementation. Even 2 minutes

To all members of this thread: Could you share your method of energy saving for your board?

Wow, it is really good. My unit consume around 10W and temperature ~40C. Really big difference for both temperature and power consumption. Could you share picture of case. The temperatures are really low so I'm wondering how it's possible. Do you have any fan attached?

I have something like this. Still now unlocked power menu. https://github.com/system76/firmware-open/issues/216

Power consumption from the wall socket. You need some power meter to check. This PC unit has unexpectedly high consumption. Mine consume 10-11 W idle and similar config but different manufacturer require 6W only.

OK, thx I will try. What is power consumption right now in your PC (with new bios)? Did you try CLEAR CMOS between process step's?

Could you share a link to bios you flashed. I followed with 1.5 edited with no result. Still no Advance Power setting.

Can you just confirm your original bios version and your PC board version. I have bios 1.5 and PC board rev 1.4.

Tool you downloaded is not only BIOS. It if full ISO file you have to write to USB stick with Rufus tool. After you write with Rufus you can open pendrive under Windows or Linux OS and you will see that it contains some file you need to change and full flash file size around 16MB. This file you...

The size is smaller because the bin file contains only BIOS itself. That is why in update command we have "-BIOS" parameter in point 8. "8.Edit 1.nsh and enter "Fpt.efi -bios -f CW-N100-V2-5M2-230927.bin"". I followed with exactly the same procedure with "-bios" parameter. My BIOS was also...

Hi I have exactly same version of PCB and BIOS. I flashed some bios but no new option unlocked. Could you share some screenshot with this "1.5 Edited" bios?

Do it on your own risk. It worked for me. I cannot promise it will work for you. Link: https://forums.servethehome.com/index.php?threads/cwwk-topton-nxxx-quad-nic-router.39685/page-75#post-405132 1. Be sure you have correct BIOS and board revision. My BIOS is Project Version BK-1264NP Ver 1.5...

I flashed this bios4.bin version but no result. No new option in bios available. My unit is being extremely throttled. Stress --cpu 4 running but frequency is 800MHz and power consumption around 10W.