Search results

What do you think of the unmanaged, Hasivo, 2.5g switches (the ones STH reveiwed and seemed to like)? If I had to, I could get by with an unanaged switch as my current VLAN needs are all 1g devices and I have a switch that could handle that. The immediate think is I now have 3 devices with...

I saw the STH review of the unmaged versions earlier. I thought they liked them. Do you know of anything reasonably priced that meets my desired requirements of 4+ 2.5g ports and 8+ 1g ports?

I got the one with the bigger case. They shipped within a day and I got it in about 2 weeks. It works so far in my testing but I've not put it into production use yet. I hope to do that. That all besing said, there was one big screwup. I ordered the N6005 version but got the N5105 version...

Does anyone have an opinion on these Hasivo, managed, 2.5g switches? Link I'm wanting a managed switch with as least 4, 2.5g ports and 8+, 1g ports but haven't found anything I really like yet. An 8- or 5-port, managed switch like these could work for me in the short to medium term, though.

No, I got this one. https://www.aliexpress.us/item/3256804770355180.html?spm=a2g0o.store_pc_home.0.0.14ec4178nNzAaf&pdp_npi=2%40dis%21USD%21US%20%24190.99%21US%20%24190.99%21%21%21%21%21%40%2112000031185623100%21sh&gatewayAdapt=glo2usa4itemAdapt&_randl_shipto=US

My trhoughput tests so far have only used plain, Proxmox to bridge the interfaces together. Using iperf3, I've tested both directions between the router and another host and also between two hosts with the router bridging between them. I will eventually install OPNsense under Proxmox but that...

This is a follow up to my earlier request for help regarding lower than expected iperf trhoughput when my CWWK, N5105, i226 router was sending the traffic. I eventually found the recommendations to disable C states in earlier posts. When I first skimmed this entire thread, I didn't yet have...

I got a v5 box with an n5105 cpu and i226 nics from CWWK and am in the process of checking it out. The cpu stress testing went fine and I'm now trying the networking. I'll eventually run OPNsense and 1 or 2 other services under Proxmox. For now, I'm just using barebones Proxmox to bridge all...

Are you talking about the J6413 or the N6005? I saw the video where Patrick talked about the N5105 vs. the N6005. I haven't seen a video yet where he reviews the J6413 except to mention that he has received some review units but hasn't actually reviewed yet. Perhaps there is an article on the...

I ordered a Protectli FW4B on Cyber Monday right before I stumbled upon servethehome. I'm pretty sure I'm going to send it back now and get one of the boxes discussed here. My question is what is the real world, performance difference between the N5105 and J6413 boxes. They seem to be the...