Search results

Thanks for confirming, @gea I thought I saw an ashift12 comment before.

My "512B" drives are actually 512E, btw

Thank you for the replies, everyone. It helped me understand raidz more. I ran more tests without parity as recommended (and with/without in different zdev counts). Parity definitely made the biggest difference, and I could see the number of zdev affecting the throughput as well. it was a...

i see. I'll try stripe and report back. Thanks for the reply @ca3y6 !

Hello, everyone. Currently running Epyc 7302P 128GB (8x 16GB) 2667Mhz 36x 10TB HGST ultrastar in RAIDZ1 (width 12, 3 ZDEV) just for performance testing inside SC847 with BPN-SAS3-846EL1 and BPN-SAS3-826EL1 backplanes. HBA is Lenovo 430-16i (9400-16i fw in tri-mode) in PCIe 3.0 x8 slot. 4...

Lenovo dropped the support for NVME. So, use the Broadcom/LSI .bin and .rom IN EFI MODE! lenovo_430-x_hba_firmware_BIOS_update.md I followed this guide only to find out about the Lenovo dropping NVME later on. Wasted 6 hours but finally got it to work via EFI method. Simply running ./storcli64...

By the way, I'm sure most of the STH members know this, but for the future members: After installing Debian, I had trouble finding UEFI boot drive. The issue was that if you have both BIOS and UEFI boot option selected (DUAL), Debian install won't show up in UEFI. So I had to change to UEFI in...

Tugm gave me a free FedEx shipping upgrade when I purchased H11SSL-i, 7302p, 128GB 2133 memory. Arrived faster than a domestic ebay from Ohio, lol. The board came with fw 1.52.00, and bios 2.1. Updating both fw and bios to 1.52.21 and 3.0, respectively, went without a hitch via BMC. Updating...

Yeah, so we can’t know for sure that you won’t have the same issue again yet, which I’m worried will happen to me if I try to update mine. I’ll try updating once I get the board and let you know.

I mean have you updated successfully on your own after getting your board back?

what bios fw are you on now? Have you updated since you got it back from SM?

oh i see. so Ah, so it was SM who got it fixed. I guess you'd still be uneasy with future bios updates. I asked Tugm to update to the latest before sending out, but I don't think he did before sending it out. We will see.

So, you didn’t have to get the hardware replaced?

That’s great!

Any update? Also, is the seller Tugm####? I just purchased 7302p and H11ssl-i. Should I ask the seller to update the bios before sending it out?