Search results

Good morning. My server actually becomes more unstable when C-states are disabled — it stays up for only about 2–3 hours. When C-states are enabled, it can remain stable for several days. The issue is that I can’t identify the root cause in Unraid’s syslog; there are no clear error messages or...

Good morning, I’m experiencing the same issue, but in my case, the server is running unRAID as the operating system. The behavior is identical: the system freezes completely, becomes unreachable via the web interface or SSH, and even stops responding to ping requests. The only way to recover is...

Have you tested any solution so far? I purchased an additional RAM module (Integral – DDR 4800Mhz), but the system continued to experience freezes. Currently, I am running with Crucial DDR5 5600Mhz RAM, and the issue persists. The freezes are now less frequent, occurring approximately every...

Good morning. I’m facing the same issue and the board is out of warranty. Now I need to source a replacement board with similar specifications from a reputable manufacturer. Any suggestions? I require a power rating of N100/150/305

Good morning. I’m facing the same issue and the board is out of warranty. Now I need to source a replacement board with similar specifications from a reputable manufacturer. Any suggestions? I require a power rating of N100/150/303.

That could very well be the case. I am still attempting to achieve stable operation (after more than half a year of functioning); otherwise, I will need to switch to a high-end board from a reputable manufacturer (although there are not many options available on the market)

My Unraid server has been running for approximately six months without any issues. Over the past week, I’ve been experiencing system freezes, requiring a hard reset via the power button. The occurrences are random—sometimes after an hour, sometimes after a day—with no discernible pattern. I...

No reply from manufacturer. Project version: CW-ADLN-NAS-V10 Here is the latest bios for V10...

Where can I find the latest BIOS for the following motherboard? I tested the following BIOS version (I believe it is the latest). The update process completes successfully, and I can access the BIOS interface. However, when booting into UNRAID, no hard drives are detected...

Good afternoon, I am once again encountering issues with the motherboard (CW-ADLN-NAS-V10). The system experiences random freezes (unraid system). I am attempting to connect a monitor in order to access the BIOS and adjust the C-states; however, the video output port has not provided any signal...

Hi everyone, I'm encountering an issue with Unraid where the system fails to boot if CPU C-states are enabled in the BIOS. When this happens, I get USB-related errors during boot, and Unraid doesn't start properly. After some testing and research, I discovered that the system only boots...

Sorry, 5600Mhz. I tested 4800Mhz Crucial and Corsair and the same problem. We will see with 5600Mhz.

Today I get a new ram stick (Crucial 16Gb 5800Mhz) and will do the test again with the new ram stick.

Running memtest86+ during 15h, no freezing but 25 errors....

Yes, I bought the same model of motherboard. The CPU fan works perfectly. Yes, I update to the last bios and reset to default. Now for example, I had the bios screen, it has been turned off, no noise, no restart, nothing, like hibernation. Yes I can do, but if i tested two differents...

Need help , again. I still have freezing problems. Software: I don't think it's an unraid problem because it's frozen in the bios screen. Hardware: I changed the RAM (crucial and corsair) the power supply , the motherboard (black model too) and same problems I have disconnected everything...

yes, but i have the same problem with the stability of unRAID server. new black motherbord and 3-4 hours and unRAID freezing/becoming inaccessible. I'm desperate, I don't know what else to do... 5 Minutes on Safe Mode.....

About 20-24W N100 3x 3.5" HDD 12Tb 1x 2.5" SSD 1Tb

My board is black xD Okay perfect. C6 activated and unRAID started perfectly. We will see if it works well

do yo know the settings in bios to put the c-state to c6?