Search results

@dak64 Advantage is the challenge first :) but also you can remove an equipment from your network, and earn some energy

Using Bouygues french provider but you may find your ISP on pon.wiki

@bryan_v I already tested xgs-pon directly in sfp router and it works fine, but never tested with switch or media converter in between. For the xgs-pon to work, we have to put serial number of original provider box and imei number, and the module appears as legitimate to receive public ip.

In fact, there is no need for pppoe. It is juste vlan tagging that can be done on xgs module or opensense and it's pure dhcp

To protect the ms-01 ports, is it a good idea to use this kind of switch with added heat dissipators on the xgs-pon module, plug the module inside and use a dac cable to ms-01 ?

Thanks @bryan_v , here are specs of my xgs-pon if you want to have a look: XGSPON ONU STICK SFP+ Transceiver SC/APC Receptacle * Single fiber bi-directional data links symmetric TX 9.953 Gb/s / RX 9.953 Gb/s with MAC function * SFP package with SC/APC receptacle * Single 3.3 V power supply *...

As it receives the fiber, I need to configure the interface with vlan and dhcp from internet provider in opnsense. I don't think I can do it via a switch

I don't necessarily think it will be cooler, but pcie card is replaceable easily, motherboard is more complicated. It's a xgs-pon module that run on a basis of 65°C because it includes a kind micro CPU and RAM.

Hi guys, I would like some advice. I will use a pon optical module to replace my internet box directly in ms-01 and I don't want to risk to plug in directly in sfp ports because it's very hot. So I prefer to use a pcie card for that. In your opinion, which single sfp 10g port card will be the...