Is there an idiots guide to updating an already 6610-48P stack?
I’m due to shut down the lab for a dust/tidy up and may as well update the switches during this time.
I updated them to 08030t when originally setting them up, not sure if that makes it easier or harder.
What you are seeing is normal, and is to do with the way vSAN reads/writes previously cached data during a reboot.
I’ve got an article saved somewhere that explains it in detail, I’ll have to dig it up.
Long story short, I was planning on moving my large home lab to a "private" facility in an effort to reduce electricity costs, but my friend who was able to provide this looks to be leaving their job, so I've detoured to a "UCS mini" solution so I can keep it running at home instead without...
There are no individual files as such, you either use an update iso if the server is managed as stand alone, or a package bundle is it’s managed by UCS.
I guess you could try downloading the stand alone updates iso and browsing through it to try and find the relevant files.
If you have lots of...
I’m just hoping to get some help getting my stack running, using the 2 x 40Gb ports between 2 ICX-6610-48P units.
I originally planned for 2 units, but due the having no luck getting people to ship to AUS I proceeded with 1 unit for a while, but my second has finally arrived.
My first is...
Correct, the shown brackets are included, as are all the required screws and cage nuts...etc
My offer was more so if someone wanted pictures/measurements of the rear brackets to assist them with making their own.
The spacing between my racks front and rear rails are 750mm from memory, and the...
Want to sell some of the heatsink pins? :)
My heatsink with a broken one either appears to be using a tim pad, or some form of epoxy as it won’t budge (without a lot of force)
Did your heatsinks just pull off easily once the pins were out?